Pascal
Have you tried
PSMOND.PRED.SYS "-k"
to kill predictive?
Robert Schlosser
MPE-CSM
HP Certified Professional
Humana / Ochsner
(504) 219-8134
Pascal Luyckx <[log in to unmask]>
Sent by: HP-3000 Systems Discussion <[log in to unmask]>
11/04/2004 10:17 AM
Please respond to
Pascal Luyckx <[log in to unmask]>
To
[log in to unmask]
cc
Subject
Re: [HP3000-L] STMXL file in use when installing HP patch OSPM58A and
patch depe ndencies
Also tried STMSHUT, but diagmond process keeps running.
Pascal
-----Original Message-----
From: Craig Lalley [mailto:[log in to unmask]]
Sent: Thursday, November 04, 2004 5:05 PM
To: Pascal Luyckx
Subject: Re: STMXL file in use when installing HP patch OSPM58A and patch
depe ndencies
STMSHUT.DIAG.SYS ?
-Craig
--- Pascal Luyckx <[log in to unmask]> wrote:
> Hi Craig,
>
> No, I did not start the network before running Patch/iX the second time.
> I just rebooted the system, did a startspool and streams on the
> console and launched patchix for the second time on the console.
>
> Any other ideas?
>
> Regards,
>
> Pascal
>
>
> -----Original Message-----
> From: Craig Lalley [mailto:[log in to unmask]]
> Sent: Thursday, November 04, 2004 3:41 PM
> To: Pascal Luyckx
> Subject: Re: STMXL file in use when installing HP patch OSPM58A and
> patch depe ndencies
>
> Pascal,
>
> Did you start the network before running Patch/iX a second time?
>
> You should only
>
> Logon on (console)
>
> :startspool lp
> :streams 10
>
> :run patchix
>
> That should work
>
> -Craig
>
> --- Pascal Luyckx <[log in to unmask]> wrote:
>
> > Hi HP3000-L list,
> >
> > I downloaded patch OSPMX58A and its patch dependencies for MPE/iX
> > 7.0 from the it resource center and installed it with Patch/iX. I
> > updated the system from the CSLT tape and started the second phase
> > of Patch/iX. Patch/iX then streams 3 installation jobs, but I
> > encounter a problem with the installation of patch ODIMXQ2C. The
> > following message is displayed on the
> > console:
> >
> > *********************************************
> > * STMXL.DIAG.SYS library is in use. *
> > * Critical diagnostics files will not be *
> > * able to be replaced if they are in use. *
> > * ODIMXQ2 C is unable to continue. *
> > *********************************************
> >
> > I check who is accessing the STMXL file :
> >
> > :listf stmxl.diag.sys,9
> > ********************
> > FILE: STMXL.DIAG.SYS
> > 1 Accessor(O:1,P:1,L:0,W:0,R:1),Share
> > system MANAGER.SYS P:1,L:0,W:1,R:1 LDEV:
> > #P52 (/usr/sbin/stm/uut/bin/sys/diagmond)
> > ACCESS: R,X,L-gmulti REC#: 0 FNUM: 22
> > LOCKS: none
> >
> > I try to stop the diagmond process by executing STMSHUT.DIAG.SYS,
> > but the diagmond process keeps on running. I then try to kill the
> > process with the ABORTPROC command, but then my session is aborted.
> >
> > Is there any other way of killing the diagmond process?
> >
> > Regards,
> >
> > Pascal Luyckx
> > Cheops technology nv
> >
> > * To join/leave the list, search archives, change list settings, *
> > * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
> >
>
>
>
>
> __________________________________
> Do you Yahoo!?
> Check out the new Yahoo! Front Page.
> www.yahoo.com
>
> * To join/leave the list, search archives, change list settings, *
> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>
__________________________________
Do you Yahoo!?
Check out the new Yahoo! Front Page.
www.yahoo.com
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
The information transmitted is intended only for the person or entity to which it is addressed and may contain CONFIDENTIAL material. If you receive this material/information in error, please contact the sender and delete or destroy the material/information.
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|
