Many of your questions can be answered by searching the 3000-L
archives:
http://raven.utc.edu/cgi-bin/WA.EXE?S1=hp3000-l
or looking on the hp site.
http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?locale=en_US&p
rodTypeId=12169&prodSeriesId=33737
> -----Original Message-----
> From: HP-3000 Systems Discussion
> [mailto:[log in to unmask]] On Behalf Of John MacLerran
> Sent: Monday, April 05, 2004 8:58 AM
> To: [log in to unmask]
> Subject: A couple of VA7100 Questions
>
>
> Dear HP3000-L folks,
>
> We may be purchasing a refurb VA7100 (to replace a couple of
> Nikes that go off support on June 30 '04) this week or next,
> and I had a couple of questions regarding what to purchase.
>
> 1. We're hoping to get a dual-controller 7100; I've read that
> each controller stores its own copy of the array
> configuration, in order to be able to fail over if one
> controller goes bad. However, I've also read that the 3000
> (an N4000 box) doesn't automatically fail over, so if we have
> one controller on the array that goes bad, we'll still have
> to unplug the FC cable from the failed controller and
> reattach to the good controller -- kind of a 'manual
> failover'. Is my understanding correct? If so, is there any
> benefit to getting two adapter cards for the e3000 box?
>
> 2. The array comes with SDM commandview software for one
> host. From my reading, I've discovered that either HP-UX or
> Windows can be used to configure the array. My question is:
> how does the configuration host access the array? Is there a
> serial port used for configuration, or will we need a FC
> adapter card for whatever host we use for configuration?
>
> 3. (ok, a 'few' questions, not a 'couple' :-) We're
> planning on getting nine of the 15kRPM 36GB drives. Is there
> a 'best way' to calculate LUN size? (we're planning on using
> RAID 1+0 and not RAID5, for performance reasons.)
>
> I'd appreciate any insight anyone can offer. Many thanks to
> donna for the assistance she's already provided.
>
> * To join/leave the list, search archives, change list settings, *
> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|