Subject: | |
From: | |
Reply To: | |
Date: | Fri, 16 Jan 2004 17:13:44 -0500 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
What is the firmware rev. of your fwscsi card?
It needs to be 3636 or greater. Preferably 3728.
Also, I'm quite sure that the HP3000 supports only raid levels 1 and 5 for
the mod20 - and only raid 1 as a boot disk.
At 04:57 PM 2004-01-16, Johnson, Tracy wrote:
>I finally (happily) configured Two RAID 1/0 devices on my Nike Array Model
>20.
>
>At boot up they appear (happily) in MAPPER also.
>
>However when I do my INSTALL, they appear as BUSY UNKNOWN in DSTAT.
>
>I'm on a test machine 957 using MPE/iX 6.5. In SYSGEN I had configured
>them as HPC2300WD. Should I have configured them as something else, or
>is this the old patch MPEKDXDA(A) problem? (I haven't put on the
>patches yet.)
>
>
>
>BT
>
>
>Tracy Johnson
>MSI Schaevitz Sensors
>
>* To join/leave the list, search archives, change list settings, *
>* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
-------------------------------------------------------------------------------------------------
Gilles Schipper
GSA Inc.
HP System Administration Specialists
300 John Street, Box 87651 Thornhill, ON Canada L3T 7R4
Voice: 905.889.3000 Fax: 905.889.3001
email: [log in to unmask] web: http://www.gsainc.com
-------------------------------------------------------------------------------------------------
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|
|
|