Subject: | |
From: | |
Reply To: | |
Date: | Wed, 17 Sep 2003 07:46:56 -0500 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Thanks very much for the help gang. We're up and running ! Dan
-----Original Message-----
From: Bill Cadier [mailto:[log in to unmask]]
Sent: Tuesday, September 16, 2003 1:59 PM
To: Dan Barnes; [log in to unmask]
Subject: Re: Re: [HP3000-L] JARMSRVD Startup Problem
Dan writes
> The file is in fact there. I removed it, but then get the following on the
> console when I try to restart it:
>
> 12:18/#J64/697/LOGON FOR: "JARMSRVD,MANAGER.SYS,MANAGER" ON LDEV #10.
> 12:18/#J13/689/Sep 16 12:18:49 localhost syslog: ArmServr Started
> 12:18/#J13/689/Sep 16 12:18:49 localhost syslog: ArmServr:
> DatagramEar::InitTask
> bind
> 12:18/#J13/689/Sep 16 12:18:49 localhost syslog: ArmServr: Ear::InitTask
> bind
> 12:18/#J64/697/LOGOFF ON LDEV #10.
>
> ... and in the stdlist ...
>
> :xeq /opt/hparray/bin/ARMSRVD
> ./arrayscan status: Success.
> ControllerSN: R07RADK258681111 PairSN: R07RADK260051111 BackPlaneSN:
> 00000025F6C9
> **** Data memory protection trap (TRAPS 68). ABORT:
> /opt/hparray/bin/ARMServer **** Unknown trap (TRAPS 69). ABORT: /opt/h
> NM PROG 7cf.000e163c fileno
> sh.hpbin.sys
> Program terminated in an error state. (CIERR 976)
> REMAINDER OF JOB FLUSHED.
>
>
> Dan
If the network is configured correctly then there is only one more thing I
can think of that
might correct this; remove the logfiles from /var/opt/hparray/log. You can
store them if you
wish and purge them as they're stored or just purge them if this is a test
system and you
don't need to retain them. You can purge store and purge the 'LOGCATLG' file
too, it will be
recreated (assuming the armserver fires up).
I have never understood why this works but there have been cases where doing
this has
resolved problems that appear to be like yours. The difficulty is that
pretty much any time the
armserver rolls over it will appear to be what you're seeing so it is
difficult to know exactly
what may be causing it.
If that doesn't resolve the problem then you should contact the Response
Center or who ever
provides your software support for some help.
hth,
Bill
hp/vCSY
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|
|
|