The Fileeq GLANCELP for DISC is probably what you'll need:
The Print Facility provides a formal file designator "GLANCELP"
for the print command. The default device class is "LP".
To change the default device, use the MPE command (:) to enter
a file equation. Use the "SAVE" option with DEV=DISC; to
create a permanent disc file.
:FILE GLANCELP;DEV=[device][;SAVE]
To print contiguously, add the "NOCCTL" option to the file
equation:
:FILE GLANCELP;DEV=LP;NOCCTL
The Print command acts as a toggle. If Print is currently
disabled, pressing F6 or entering "L" enables it; otherwise,
Print is disabled. Once you enable the print facility, it
prints each screen as the screen is updated. Once Print is
Best regards,
Andreas Schmidt
CSC Managed Services GmbH
Global Infrastructure Services, Global Processing Engineering Services
DuPont-Strasse 1, Room 1-346
D-61352 Bad Homburg
Germany
Phone: +49 (0) 6172 / 87-2117 Fax -2195 DUCOM x951-2117
eMail: [log in to unmask]
HP e3000 Intranet Information at http://web1.cscbhg.dupont.com/web/hp3000/
Unix Intranet Information at http://bhghpx12.bhg.dupont.com/
----------------------------------------------------------------------------------------
This is a PRIVATE message. If you are not the intended recipient, please
delete without copying and kindly advise us by e-mail of the mistake in
delivery. NOTE: Regardless of content, this e-mail shall not operate to
bind CSC to any order or other contract unless pursuant to explicit written
agreement or government initiative expressly permitting the use of e-mail
for such purpose.
----------------------------------------------------------------------------------------
|---------+--------------------------->
| | Jeff Kubler |
| | <jeff |
| | @kublerconsultin|
| | g.com> |
| | Sent by: HP-3000|
| | Systems |
| | Discussion |
| | <HP3000-L |
| | |
| | |
| | 08/29/03 11:55 |
| | PM |
| | Please respond |
| | to Jeff Kubler |
| | |
|---------+--------------------------->
>--------------------------------------------------------------------------------------------------------------------------|
| |
| To: [log in to unmask] |
| cc: |
| Subject: [HP3000-L] Glance question |
>--------------------------------------------------------------------------------------------------------------------------|
To all;
Anyone recall how or if you can get the Glance Back View screen to keep
going back through all of the data it has collected(?) while running in the
interactive mode?
Thanks,
Jeff Kubler
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|