Subject: | |
From: | |
Reply To: | |
Date: | Sat, 6 Sep 2003 13:14:41 -0700 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Hello Mr. Al,
EQZ is for the Hot spare only. It means that data is being copied from the hot
spare to the replacement disc.
FYI
EQZ n Hot spare only. Data is being copied from the hot spare onto a
replacement disk module in the logical disk unit whose number is shown.
FMT n Being hardware formatted. Generally, modules do not need hardware
formatting.
OFF Powered off by the SP, which can happen if the wrong type of module is
inserted; a message also appears in the Unsolicited Event Log.
POW n Powering up.
RDY n Ready (bound with its secondary route via this SP). The other SP is the
primary route to this disk module. On the other SP’s display, this module's box
shows status ENA. For a hot spare code is RDY H and means that the hot spare is
in normal standby mode, ready for service if a module in a RAID group fails.
REB n Rebuild is in progress.
UNB ** Unbound; ready to be bound into logical disk unit.
blank No disk module or a non-operational disk module in compartment (slot).
HTH,
-Craig
--- Al nizzardini <[log in to unmask]> wrote:
> Hello all, i am installing a mod 20 and in the presentation utility one of
> the drives is in the "EQZ" state. Does anyone know what this is?
>
>
>
> Al Nizzardin
>
> Cell: (732-539-6462)
>
> * To join/leave the list, search archives, change list settings, *
> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
http://sitebuilder.yahoo.com
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|
|
|