I think not - at least not for ALL 9x9's.
The 9x9 multi-function I/O card has a large jumper block that determines
which of the AUI or BNC port is active - just as in the 9x7 and 9x8 mfio cards.
It is located close behind the ports themselves. There should be a label
denoted as external/internal in clode proximity to the jumper.
I cannot recall which indicates AUI and which BNC. Trial and error will
require 2 attempts in the worst case.
At 10:11 PM 2003-03-12, Bob J. wrote:
>On the 9x9 Core I/O the network port will autosense.
>
> Bob J. -- Ideal Computer Services
> http://www.icsgroup.net
>
>
>"Keiper, Ron" wrote:
> >
> > Hey gang,
> > I'm sure somebody out there can answer this one for me, I am trying to find
> > where the setting is on the 9x9 MFIO card to switch from the Thin Lan port
> > to the AUI port..
> > If any one out there can point me in the right direction, it would be very
> > helpful..
> >
> > Thanks
> >
> > Ron Keiper
> > HP/Remedy support: Nielsen Media Research
> >
> > * To join/leave the list, search archives, change list settings, *
> > * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>
>* To join/leave the list, search archives, change list settings, *
>* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
-------------------------------------------------------------------------------------------------
Gilles Schipper
GSA Inc.
HP System Administration Specialists
300 John Street, Box 87651 Thornhill, ON Canada L3T 7R4
Voice: 905.889.3000 Fax: 905.889.3001
email: [log in to unmask] web: http://www.gsainc.com
-------------------------------------------------------------------------------------------------
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|
