Latest Patch/iX version for 7.0 is B.02.07

Install that and try again..

> -----Original Message-----
> From: Bartram, Chris (Contractor)
> [mailto:[log in to unmask]]
> Sent: Tuesday, March 11, 2003 10:18 AM
> To: [log in to unmask]
> Subject: Patch/iX doesn't wanna install patches
>
>
> Been going around in circles on this. MPE/iX 7.0 on a 918LX.
> Downloaded a whole batch of patches (via patchman script), go
> through the qualification step (all ok). Go to create a tape,
> get the screen below, (scrolls through steps of copying
> NL/SL/etc.) then back to the main menu. If I 'EXIT' it tells
> me the patch process hasn't completed. If I 'CREATE TAPE'
> again, it does the same thing (over and over). No error
> messages. Don't see anything obvious in the various log
> files. Stage/iX IS initialized and a staging area defined,
> though Patchi/iX doesn't seem to care. Patch/iX Version B.02.00
>
>
>   Main Menu                       HP Patch/iX
>     Create [Tape]
>
>
> Start Time    Operation                     Estimated Time
>  Elapsed Time
> ==============================================================
> ==============
> ====
>               Restore Patch Files           Not Required
> 11:43:00      Modifying Libraries           02:33:00
>     04:31
>               Create A New Start PME           02:00
>               Create the Tape               No Tape Requested
>               Create the Stage              Stage Not Allowed
>
>
>
>
>
>
>
> ==============================================================
> ==============
> ====
>
> +--------------------------------Message
> Window--------------------------------+
> | Message: Currently Modifying the staged SL in SL.INSTALL.SYS.
> |
> |        <...............                               >
> |
> |
> |
> +-------------------------------------------------------------
> ----------
> +----
> ---
>
>
> Only errors I see in PMLOG LOOK like they're recoverable (no
> PMSWINFO.PUB.SYS file). :
>
>    ** GENERATING PMSWINFO
> -->Reading PMSWINFO.PUB.SYS
>
> **************** BEGIN ERROR *****************
>
> IN ReadPMSWINFO: RECOVER_BLOCK
> PMSWINFO_NOT_FOUND
> WARNING: HP Patch/iX failed to locate PMSWINFO.PUB.SYS (PMERR 65).
>
> CAUSE: HP Patch/iX reads installed patch information from the
> PMSWINFO.PUB.SYS file. If this file doesn't exist or can't be
> read then HP Patch/iX will not be able to display installed
> patch information
>
> ACTION:
>   This is only a warning message because this case is common
> when there
>   are no preveously installed patches, and it does not
> inhibit HP Patch/iX
>   from successfully installing patches.
>
> --> Generating new PMSWINFO
> --> Generating new PMSWINFO
> --> Patch ID: ACCGDV6A
> --> Patch ID: ATCLXV7B
> --> Patch ID: BBXMXA3B
> --> Patch ID: CMLMXF0A
> --> Patch ID: COBMXB0B
> --> Patch ID: CONGDL5A
> --> Patch ID: DTSGDJ4A
> --> Patch ID: FDDGDV7A
> --> Patch ID: FTPGDM9A
> --> Patch ID: GLAMX80B
> --> Patch ID: ITOED07C
> --> Patch ID: JDBLXU8C
> --> Patch ID: LANGDV8A
> --> Patch ID: LNCGDN2A
> --> Patch ID: LNKMX05A
> --> Patch ID: LSSGDJ7A
> --> Patch ID: MPEKXE4D
> --> Patch ID: MPELX53D
> --> Patch ID: MPELX63B
> --> Patch ID: MPELX68B
> --> Patch ID: MPELX81C
> --> Patch ID: MPELX88B
> --> Patch ID: MPELXH9B
> --> Patch ID: MPELXJ6C
> --> Patch ID: MPELXJ7C
> --> Patch ID: MPELXM0A
> --> Patch ID: MPELXR0B
> --> Patch ID: MPELXT0B
> --> Patch ID: MPELXT1C
> --> Patch ID: MPELXT7E
> --> Patch ID: MPELXU5C
> --> Patch ID: MPELXU7B
> --> Patch ID: MPELXV8C
> --> Patch ID: MPELXW8B
> --> Patch ID: MPELXX1A
> --> Patch ID: MPELXX5A
> --> Patch ID: MPELXY8B
> --> Patch ID: MPEMX02C
> --> Patch ID: MPEMX19B
> --> Patch ID: MPEMX21B
> --> Patch ID: MPEMX27C
> --> Patch ID: MPEMX38D
> --> Patch ID: MPEMX39B
> --> Patch ID: MPEMX43C
> --> Patch ID: MPEMX49A
> --> Patch ID: MPEMX50A
> --> Patch ID: MPEMX53B
> --> Patch ID: MPEMX54A
> --> Patch ID: MPEMX55B
> --> Patch ID: MPEMX59B
> --> Patch ID: MPEMX67B
> --> Patch ID: MPEMX69A
> --> Patch ID: MPEMX74B
> --> Patch ID: MPEMX79C
> --> Patch ID: MPEMX86A
> --> Patch ID: MPEMX90C
> --> Patch ID: MPEMX93B
> --> Patch ID: MPEMX94A
> --> Patch ID: MPEMX99B
> --> Patch ID: MPEMXA0A
> --> Patch ID: MPEMXB1A
> --> Patch ID: MPEMXC6A
> --> Patch ID: MPEMXD5A
> --> Patch ID: MPEMXD8C
> --> Patch ID: NMCGDC6A
> --> Patch ID: NMSGDL0A
> --> Patch ID: NRCMXB8B
> --> Patch ID: NSFGDG6A
> --> Patch ID: NSRGDE7A
> --> Patch ID: NSSGDG7A
> --> Patch ID: NSTGDV5A
> --> Patch ID: ODBMX78C
> --> Patch ID: ODIMX96B
> --> Patch ID: PARMX97B
> --> Patch ID: PSIGDW0A
> --> Patch ID: PTDGDQ8A
> --> Patch ID: PX2LXB1C
> --> Patch ID: QUEMX68B
> --> Patch ID: SMLGDT8A
> --> Patch ID: SNMGDD4A
> --> Patch ID: SPTMX04C
> --> Patch ID: TIXMXC3C
> --> Patch ID: VPLLX49D
> --> Patch ID: WBWGDT7A
>    ** END GENERATING PMSWINFO
>
> -->Reading PMSWINFO.PUB.SYS
>
> **************** BEGIN ERROR *****************
>
> IN ReadPMSWINFO: RECOVER_BLOCK
> PMSWINFO_NOT_FOUND
> WARNING: HP Patch/iX failed to locate PMSWINFO.PUB.SYS (PMERR 65).
>
> CAUSE: HP Patch/iX reads installed patch information from the
> PMSWINFO.PUB.SYS file. If this file doesn't exist or can't be
> read then HP Patch/iX will not be able to display installed
> patch information
>
> ACTION:
>   This is only a warning message because this case is common
> when there
>   are no preveously installed patches, and it does not
> inhibit HP Patch/iX
>   from successfully installing patches.
>
>
>     ***  STARTING CREATE TAPE PHASE    ***
> TMPSTR_CREATION: start_at_step = 0
> --> Creating the TMPSTR files
> RESTORE_PP_FILES: start_at_step = 10
> --> calculating space needed for temporary files
> --> Number of sectors needed = 867792
> Build AXLSPACE: BUILD AXLSPACE.PUB.SYS;DISC=867792,32,32
> purge AXLSPACE:
> SL_MODIFICATION: start_at_step = 12
> --> Adding segments to SL.INSTALL.SYS
> XL_MODIFICATION: start_at_step = 13
> --> Adding SOMS to XL.INSTALL.SYS
> NL_MODIFICATION: start_at_step = 14
> --> Adding SOMs to XL.INSTALL.SYS
> OSSOM_MODIFICATION: start_at_step = 16
> RELINKER_MODIFICATION: start_at_step = 17
> --> Applying relinker patches
> BINARYP_MODIFICATION: start_at_step = 18
> --> Applying binary patches
> SYSINTRIN_MODIFICATION: start_at_step = 19
> --> patching system intrinsics
> SYSFILE_MODIFICATION: start_at_step = 20
> CLEANXL_NL: start_at_step = 21
> CLEANXL_XL: start_at_step = 22
> --> Performing CLEANXL on XL.
> CREATE_START_IMAGE: start_at_step = 23
> --> Building the START image.
> Skipping DO_CREATE_CSLT: start_at_step = 24
>      ***   ENDING CREATE TAPE/STAGE PHASE    ***
>
> Patch management was NOT successfully completed.
>
> ** EXITING HP Patch/iX **
>
>
> Any hints/tips?
>
> TIA,
>   Chris Bartram
>
> * To join/leave the list, search archives, change list settings, *
> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *