Matthew,
I would need some more information. But looking at your output I see
DATE: 01/01/1970 TIME: 00:00:00
It appears the clock has not been set correctly, It is to early for me to
remember how to set it in GSP. Try help
Also be sure to boot from primary and INTERACT with IPL, at the ISL prompt
check and set the time again.
Good Luck, let us know
Regards,
-Craig
--- Matthew Perdue <[log in to unmask]> wrote:
> Problem: boots to MPE, seems to run okay until network services
> started, within 5 minutes it's a silent halt
> System: A400 MPE 7.0 pp1
> GSP A.01.12 10-23-02 13:53:42
>
> Tale of woe: SBC in a "I just can't imagine they'd do this" act dropped
> my live T1 yesterday afternoon to remove bridge taps without telling
> anyone and without the standby circuit they were supposed to have
> already installed. Then after deciding they couldn't fix it LEFT for
> the day, also without telling anyone. All this took place between the
> CO and before the network demark, no SBC persons came on site that
> could be identified. Later SBC says they don't know how long the line
> will be down. Hence the next step.
>
> Servers had to be relocated to my upstream ISP's network center. SuSE
> box up okay. HP3000 box not up okay. Boots to MPE, seems to run okay
> until network services started, then silent halts.
>
> Searched ITRC, identified 98% word-for-word description of alert level
> 10 problem with GSP, downloaded and applied GSP patch PF_CPREGSPA0112
> to update A.01.10 to A.01.12. Didn't help. Response center id's as a
> software problem. GSP's been reset several times, system also.
>
> Another problem: support contract expired, per incident call $1,250
> minimum + $250/hour. Holding out hope that someone on HP3000-L may be
> able to help with this!
>
> Info from GSP log:
> Log Entry # 0 :
> SYSTEM NAME: xxxxxx
> DATE: 01/01/1970 TIME: 00:00:00
> ALERT LEVEL: 10 = Boot possible, functionality lost
>
> SOURCE: 3 = PDH
> SOURCE DETAIL: 6 = interconnect medium SOURCE ID: 0
> PROBLEM DETAIL: 3 = non-responding, may need GSP reset.
>
> CALLER ACTIVITY: 2 = operation STATUS: 0
> CALLER SUBACTIVITY: 02 = platform internal interconnect
> REPORTING ENTITY TYPE: 1 = service processor REPORTING ENTITY ID: 00
>
> 0x581008A336002020 00004600 01000000 type 11 = Timestamp
>
> Please forgive any mispellings I've been up all night (7:21AM here now).
>
> * To join/leave the list, search archives, change list settings, *
> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
__________________________________________________
Do you Yahoo!?
Yahoo! Tax Center - forms, calculators, tips, more
http://taxes.yahoo.com/
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|