Subject: | |
From: | |
Reply To: | |
Date: | Mon, 25 Nov 2002 14:11:34 +1100 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
On Monday, November 25, 2002 1:51 PM, Lee Bell wrote:
> Andy M Johnson wrote:
> > so I figured I might get meself an analyser. Any recommendations ?
We presently use the Alpha-1 analyser at the shop. For a while we used the
UBS, which was a handy unit for travelling divers. In both cases we
"guestimated" the flow rate over the sensor! :-)
> Perhaps. My present analyzer is an Analox. It works and is holding up
> fine. While it does OK as it comes, I suggest you add a low pressure
> inflator barb/flow restrictor and short length of hose to it, something
I'm
> about to do. Being able to connect it to the low pressure inflator hose
> makes using it just a bit quicker and convenient and, therefore, a bit
more
> likely to be done. I've got a bit of pain in my elbow and numbness in a
> couple fingers on my left hand as a result of not using mine the one time
I
> really should have.
Is that a cautionary tale that you might care to share? :-)
Strike
|
|
|