One further note on this for those planning on upgrading to 7.0 - although I
upgraded with the Express 1 powerpatch. I also needed the reactive patches
for predictive (as mentioned by a few others). I have now put the reactive
patches in place and everything is looking good.
I also am recommending to users going from 6.0 to 7.0 they read the notes on
6.5 because the changes for SYSDIAG tools can be significant especially if
you use predictive. The CSTM, STM and MSTM that replace SYSDIAG are just
enough different and the rules for using them have change enough that it is
not as intuitive as tools were in the past (or maybe they are just that much
more robust that they are not as straight forward as the SYSDIAG).
Another note that both CSTM and PSCONFIG took over 10 minutes to activate
the 1st time dependant on the amount of drives and other devices on the
system being upgraded this could be shorter or longer time.
HP was unable to find any Predictive User's guide online. Part #
50779-90012. However, they recommended following documents on the ITRC site:
KBRC00010216 STM and System Performance : Issues, Fixes and Recommendations
KBAN00000289 MPEiX 6.5 and Predictive
KBRC00002625 MEMSCAN(130B) on MPE iX 6.5 - Occurs when network is not up
Thank you all for your help,
Cat
*****************************
Catherine Litten, Sr. Programmer/Analyst, Valley Presbyterian Hospital
15107 Vanowen Street, Van Nuys, CA 91405 (818)782.6600 x 2140
www.valleypres.org
www.littenfamily.com
********************************
The thoughts, comments, and opinions expressed herein are mine. They do not
reflect those of my employer, nor anyone else.
********************************
This E-mail is covered by the Electronic Communications Privacy Act, 18
U.S.C. ?? 2510-2521 and is legally privileged. This information is
confidential information and is intended only for the use of the individual
or entity named above. If the reader of this message is not the intended
recipient, you are hereby notified that any dissemination, distribution or
copying of this communication is strictly prohibited. If you have received
this transmission in error, please notify the sender immediately by return
electronic transmission and then immediately delete this transmission.
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|
