After you have changed the jumper to switch to AUI, remember to set the SQE
heartbeat setting on the AUI adapter.

I think you still have to do this anyway.

Dave
----- Original Message -----
From: "Beghein Johan" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Saturday, April 20, 2002 10:16 AM
Subject: DTC 48 Interface


> Hello,
>
> I'm trying to replace a few BNC connections by RJ45.
>
> I have an old DTC48, I took the coax link off, put a external AUI to RJ45
> tranceiver from Centrecom on the AUI interface of the DTC, connected the
> tranceiver to a hub  and reboot the DTC.
>
> The DTC can't download its config.
>
> Does anybody tried the same ?
> Is there something to change on the DTC side, or are all the interfaces up
?
> Do i need a specific tranceiver ?
>
> I know my hub can connect with the coax segment, because my HP3000 is on
the
> hub, and my DTC's are on the coax, and everything works fine.
>
> Thanks everybody.
>
> Regards,
>
> Beghein Johan
> [log in to unmask]
>
> * To join/leave the list, search archives, change list settings, *
> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *