At DTC  prompt, try the following in order to reset the DTC internal cache:

 >dtc07 c hpn4000.mouscron.boulanger -d

That should solve your problem.


At 05:45 AM 2001-11-16, Beghein Johan wrote:
>Hello,
>
>I'm migrating from a hp3000 969ks/200 to a e3000 N4000-100-330
>
>I still use a few terminals connected to DTC and managed by Openview DTC
>Manager.
>
>On the 3000 side, I configured everything in nmmgr, and linked my DTS to a
>link
>named DTSLINK.
>
>The DTSLINK is on lanic 0/0/0/0 and configured as BT100.
>
>On the OV side, I configured a medium computer, with the mac adress found
>with the
>lincontrol @;status=all command.
>
>My OV station and my DTC's are still on a coax, and my N4000 is plugged with
>rj45
>in a hub connected to this coax.
>
> >From OV, i can do a reset of an ldev on my N4000, so I assume the physical
>link is correct.
>
>But from a terminal, with non nailed access, I can't connect to the domain
>of my N4000
>
>dtc07> c hpn4000.mouscron.boulanger
>
>Connecting...
>
>Connection refused due to a communication failure    (DTC15)
>
>Any idea ?
>
>Thank You.
>
>Beghein Johan.
>[log in to unmask]
>
>* To join/leave the list, search archives, change list settings, *
>* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *

---------------------------------------------------------------------------
Gilles Schipper
GSA Inc.
HP System Administration Specialists
300 John Street, Box 87651   Thornhill, ON Canada L3T 7R4
Voice: 905.889.3000     Fax: 905.889.3001
Internet:  [log in to unmask]
---------------------------------------------------------------------------

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *