In article <[log in to unmask]>, "Knight, Sam" <[log in to unmask]>
wrote:
> If you do the following:
>
> !JOB JOB1,USER.ACCT
> !STREAM JOB1.JOBGROUP.JOBACCT;IN=1
> <JOB LOGIC>
> !EOJ
>
> There should be no drifting.
>
> *******************************************************
>
> Sam Knight Phone (904)745-7509 Sr.
> Programmer/Analyst Fax (904)745-7238 Jacksonville University
> Jacksonville, FL 32211
>
>
And In article <[log in to unmask]>, "Paul S. Butler"
<[log in to unmask]> wrote:
> One problem with using "IN=" is that the jobs will gradually drift and
> not get scheduled when you would like. If you absolutely need to have
> your job run at 8:30PM every day, "AT=20:30" is the way to go.
>
> BUT if the job takes less than a minute to run, the job will get
> immediately streamed again. The way around this is to use a PAUSE:
>
> !JOB JOB1,USER.ACCT
> <JOB LOGIC>
> !PAUSE 60
> !STREAM JOB1.JOBGROUP.JOBACCT;AT=20:30
>
> ------------------------------------
> Paul S. Butler, System Administrator
> Data Trace Information Services LLC
> (916) 797-5000
>
>
Both may give problems.
In the first case: I've sometimes had a process in the C-queue using so
much time, the job in the D-queue took several minutes to take off:
your IN=1 will drift accordingly.
In the second case, if your <JOB LOGIC> results in an uncaught error:
"The remainder of the job will be flushed", including the scheduling
stream. So, what I now usually do is, at the start of the job do a
pause 70, then the scheduling stream with an AT=, and then the <JOB
LOGIC>. If necessary, you can adjust the start time accordingly (i.e. 1
minute early).
> ----- Original Message -----
> From: "Derrick Tietz" <[log in to unmask]> To: <[log in to unmask]>
> Sent: Friday, November 02, 2001 1:32 PM Subject: Imitate a scheduler
> using stream?
>
>
> Hello all,
> Is it possible to imitate scheduling software using the stream command?
> I want a job to run every day at 8:30 PM without having to stream it
> daily. I tried streaming Job1 at=20:30, job1 streams Job2 in=,1 and Job2
> streams Job1 in=,23. I also tried using "at" instead of "in" in Job1 and
> Job2. Is it possible to make this work? When I try this I get a long
> list of the jobs that repeat, but I never get a JOBNUM. Thanks in
> advance,
> Derrick
>
> * To join/leave the list, search archives, change list settings, * *
> etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>
> * To join/leave the list, search archives, change list settings, * *
> etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|
