Late reply:
This was configured using at DTC 72. Since the Ldevs used
a profile, and the profiles were displayed in rows and
columns for the particular card on the DTC, I had failed
to noticed one the profiles was slightly different than
the rest for this LDEV.
Once I had matched the profiles on both hosts for this
card on this DTC, the error went away.
Tracy Johnson
MSI Schaevitz Sensors
>-----Original Message-----
>From: John Spitzer [mailto:[log in to unmask]]
>Sent: Monday, August 13, 2001 4:45 AM
>To: [log in to unmask]
>Subject: Re: Switched DTC 2 Hosts and 1 Printer (Console Log Detail)
>
>
>Hmm, These messages don't look exactly like I would expect if
>the status
>request timed out. You may have to get support to look at
>these. It would
>help greatly if you could determine how to reliably cause this
>to occur. Is
>the other system using the port when this occurs? What is the
>Term Type you
>are using in the profile? Is the spooler empty when you issue
>the STARTSPOOL
>command? What are all the parameters in the profiles for both systems.
>
>John Spitzer
>CSY LAB
>The above are my opinions, not those of HP support, or HP.
>
>"Johnson, Tracy" <[log in to unmask]> wrote in message
>news:9kfcbl0k7o@enews2.newsguy.com...
>> Here is more detail on my earlier post. After STARTSPOOL on
>> the unsupported machine I get the following for the LDEV in
>> question (411):
>> ----
>> 13:44/238/Output spooler, LDEV #411: FDEVICECONTROL error.
>> Native Mode Spooler message 9547
>>
>> 13:44/238/Storage Management SIO undefined function.
>> (FILE SYSTEM ERROR -6001)
>> File System message 6001
>>
>> 13:45/238/Printer storage manager; an error was reported from a lower
>level
>> subsystem.
>> Printer Storage Manager message 13
>>
>> 13:45/238/An unclassified software problem occurred.
>> Low Level I/O message 249
>>
>> 13:45/238/Output spooler, LDEV #411: The spooler could not complete
>> output of file O5227.OUT.HPSPOOL.
>> Native Mode Spooler message 9511
>>
>> 13:45/238/Output spooler, LDEV #411: Stopped.
>>
>> Tracy Johnson
>> MSI Schaevitz Sensors
>>
>> * To join/leave the list, search archives, change list settings, *
>> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>>
>
>* To join/leave the list, search archives, change list settings, *
>* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|
