Subject: | |
From: | |
Reply To: | |
Date: | Mon, 7 May 2001 09:33:25 -0400 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
John Burke <[log in to unmask]> writes:
<snip>
> 1. configure the dip switches correctly
> 2. insert the drives (while system is running)
> 3. go into IOCONFIG and add the path and ldev (it should go out and mount
> the drive at this point - look on the console for messages)
> 4. use volutil to bring the drive into the appropriate volume.
It appears that I messed something up since the drive will not mount, so I
will have to reboot and see if ODE/Mapper can recognized the drive. Either
that or the disk is defective.
Now, for the last three weekends in a row, I have been called in at 5 AM
every Saturday to restart the computer because it went down due to power
problems, but this weekend, since I wanted it to reboot, it never went down!
Go figure.
Jim Phillips Information Systems Manager
Email: [log in to unmask] Therm-O-Link, Inc.
Phone: 330-527-2124 P. O. Box 285
Fax: 330-527-2123 10513 Freedom Street
Web: http://www.tolwire.com Garrettsville, OH 44231
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|
|
|