I suspect that the free space on you system volume set is reserved for
transient space (hence the request for a DISCFREE format C report). Look at
the amount of available PERM space, and use ALTERVOL to adjust it, if
necessary.
-----Original Message-----
From: James B. Byrne [mailto:[log in to unmask]]
Sent: Friday, April 20, 2001 8:36 AM
To: [log in to unmask]
Subject: Out of disc space?
I am getting strange errors on my HP3000-918LX MPE/iX-6.0- PP1. The system
seems to believe that it is out of disc space. As an example here is what I
am seeing when running a few common commands:
:RUN QEDIT.PUB.ROBELLE;PARM=4;INFO="TEXT !PARM1"
Qedit/iX. Copyright Robelle Solutions Technology Inc. 1977-2000 Type ? for
Help
(Version 5.0)
Licensee: Harte & Lyne Limited [65W]
Qedit unrecoverable file system error from Fwrited
OUT OF DISC SPACE (FSERR 46)
Warning: This error can only occur if 1) :File is used to fool Qedit,
2) harware has problems, 3) you have exceeded your group or account
disc space limits, or 4) Qedit has a bug.
Qedit will now abort to prevent any damage to your workfile.
Before attempting to recover your file, you should back it up
with Fcopy, Suprtool, or :Copy. If recovery after an Open Command
is not complete, use Qcopy with the Serial option on the backup.
**** PROCESS QUIT; PARAM = 888
ABORT: QEDIT.PUB.ROBELLE
NM SYS a.00a974a0 dbg_abort_trace+$24
NM PROG 2f8.00306058 qf_file_err+$20c
RUN QEDIT.PUB.ROBELLE;PARM=4;INFO="TEXT npconfig"
Program terminated in an error state. (CIERR 976)
:
:
> and
:help
File system error on HELP list file. (CIERR 1808)
:
:copy npconfig, npconf02
The COPY command failed due to an internal error. (CIERR 9147)
:
> DISCFREE shows the following:
:DISCFREE A
DISCFREE A.50.01 Copyright (C) Hewlett-Packard 1992. All rights reserved.
FRI, APR 20, 2001, 10:16 AM
----------------------------------------------------------------------------
---
LDEV : 1 -- (MPEXL_SYSTEM_VOLUME_SET:MEMBER1)
LARGEST FREE AREA: 3678544 TOTAL FREE SPACE: 3842960
0 BLOCK(S) OF 1- 9 CONTIG. SECTORS = 0 FREE SECTORS. 0%
653 BLOCK(S) OF 10- 99 CONTIG. SECTORS = 28176 FREE SECTORS. 1%
631 BLOCK(S) OF 100- 999 CONTIG. SECTORS = 122592 FREE SECTORS. 3%
9 BLOCK(S) OF 1000- 9999 CONTIG. SECTORS = 13648 FREE SECTORS. 0%
0 BLOCK(S) OF 10000- 99999 CONTIG. SECTORS = 0 FREE SECTORS. 0%
1 BLOCK(S) OF 100000-AND UP CONTIG. SECTORS = 3678544 FREE SECTORS. 96%
----------------------------------------------------------------------------
---
LDEV : 2 -- (HAL_DATA:MASTER)
LARGEST FREE AREA: 5360608 TOTAL FREE SPACE: 6239520
0 BLOCK(S) OF 1- 9 CONTIG. SECTORS = 0 FREE SECTORS. 0%
188 BLOCK(S) OF 10- 99 CONTIG. SECTORS = 9488 FREE SECTORS. 0%
243 BLOCK(S) OF 100- 999 CONTIG. SECTORS = 52512 FREE SECTORS. 1%
14 BLOCK(S) OF 1000- 9999 CONTIG. SECTORS = 37600 FREE SECTORS. 1%
4 BLOCK(S) OF 10000- 99999 CONTIG. SECTORS = 178720 FREE SECTORS. 3%
3 BLOCK(S) OF 100000-AND UP CONTIG. SECTORS = 5961200 FREE SECTORS. 96%
:
Virtually all of our applications handle data exclusively with Image and
that disc space is pre-allocated. They are not reporting any problems,
except when trying to print.
As the fates would degree, one of our HP JetDirect boxes apparently decided
to go south two days ago. That problem masked this one. I would normally
suspect (jump to the conclusion really) that one must be a consequence of
the other; but in this case the Windows Print Spoolers are also having
problems with that particular box. Unless there is some way for a JetDirect
Box to affect MPEiX I can't see how these two problems can be connected to
each other.
Any and all help or suggestions on the matter will be received with
gratitude. As I subscribe to the list digest, a copy of your replies via
direct eMail would be appreciated.
Regards,
Jim
--- *** e-mail is not a secure channel ***
James B. Byrne Harte & Lyne Limited
vox: +1 905 561 1241 9 Brockley Drive
fax: +1 905 561 0757 Hamilton, Ontario
mailto:[log in to unmask] Canada L8E 3C3
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|
