Hi Bob,

Did you change the config of the jetdirect to point to the gateway?
Is there a router-change?

Eric Jansen
Technical Consultant
Computer Design & Integration, LLC
696 Route 46 West, Teterboro, NJ  07608
Phone:  201-931-1420 x313
Fax:    201-931-0101
Pager:  973-205-1236
[log in to unmask]
www.cdillc.com



> -----Original Message-----
> From: Bob Walker [mailto:[log in to unmask]]
> Sent: Monday, January 22, 2001 4:17 PM
> To: [log in to unmask]
> Subject: [HP3000-L] Need network printing help
>
>
> HELP: Our campus has just undergone an almost complete ip
> re-assignment
> and now I can't network print to some of our printers from our HP3000.
>
> I CAN network print by ip-name to printers on the same subnet as the
> HP3000.
>
> I CAN"T network print by ip-name or ip-number to printers on a
> different subnet even though I can nslook them up from the HP.
>
> HP3000 ip number did not change, but the GATEWAY did. This was updated
> in NMMGR.
>
> The error messages are as follows:
>
> 12:44/79/Output spooler, LDEV #200:  SNMP error SNMP_ResponseTimeout
> reported while retrieving printer status.
> Native Mode Spooler message 9656
>
> 12:44/79/Output spooler, LDEV #200:  Cannot communicate with network
> printer. Check network xport config, NPCONFIG.PUB.SYS, xport and links
> started status, intermediate network, and printer status.
> Native Mode Spooler message 9662
>
>
> Looks like SNMP can't find these printers.
> Any ideas??
> Thanks, Bob.
>
>
>
>
> Sent via Deja.com
> http://www.deja.com/
>