HP3000-L Archives

November 2000, Week 1

HP3000-L@RAVEN.UTC.EDU

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Gary Sielaff <[log in to unmask]>
Reply To:
Gary Sielaff <[log in to unmask]>
Date:
Fri, 3 Nov 2000 14:55:05 -0800
Content-Type:
text/plain
Parts/Attachments:
text/plain (64 lines)
I was able to use EZ-BIOS and that worked.  I
was just sure that there should be a patch I could
download to flash the bios, but just haven't been
able to find one.  I did call HP finally and the rather
reluctantly said they didn't think there was one.
thanks again
Gary
----- Original Message -----
From: "Denys Beauchemin" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Friday, November 03, 2000 11:47 AM
Subject: Re: [HP3000-L] OT very much OT


> Dear Miffed :),
>
> You have fallen into the gray area where disk drives jumped from under the
800
> MB limit of the traditional addressing to the LBA method.  As you properly
> diagnosed, your system is unable to do anything with this drive because of
its
> size.  There are several avenues to explore:
>
> 1- OnTrack software may have an overlay that will enable access to the
drive.
>  It's nasty but it works.
> 2- You can find out which BIOS is running on your HP and contact the BIOS
> manufacturer for an update.  This might be a PROM or a flash program.
This may
> also cost money.
> 3- Swap out the motherboard on the system with a new one of the same
format.  I
> would recommend ASUS or Tyan.
> 4- Get a new computer.
>
> Kind regards,
>
> Denys. . .
>
> Denys Beauchemin
> HICOMP
> (800) 323-8863  (281) 288-7438         Fax: (281) 355-6879
> denys at hicomp.com                             www.hicomp.com
>
>
> -----Original Message-----
> From:   Gary Sielaff [SMTP:[log in to unmask]]
> Sent:   Friday, November 03, 2000 11:22 AM
> To:     [log in to unmask]
> Subject:        OT very much OT
>
> I have emailed HP PC tech supt. but to no avail.  They
> won't answer or don't know the answer... anyway.. and
> if I'm out of order let me know...
> My 840 meg drive went bad in my vectra xm 5/120 series 4
> and I put a 4.3 in its place..  The p/c won't have anything
> to do with it.. I fdisked and formatted for two 2 gig partitions
> but still nothing.  Looked on the support pages for a
> bios flash to enable LBA but nothing.... Question .. does
> anyone know if HP has a bios upgrade to handle large
> disks?
> Miffed in Moses Lake
> Gary

ATOM RSS1 RSS2