While I can't be sure that this may be part of your problem
but I would check into the patch level of the MPE 5.5 system, HUSKY.
I have seen date related issues on 5.5 with out any PowerPatches and
earlier PowerPatches (PP1).  I would recommend that you at least be on
5.5 PowerPatch 7.

Hope this helps,

Barry Durand


On 18 Sep 00, at 3:59, Dinu Iulian wrote:

> I am a System Engineer to a factory which have 2 severs HP 3000 series: one
> S937 with MPE/iX 5.5 named HUSKY and one S932 with MPE/iX 4.0 named PANDA.
> I have two problems:
> 1. To S932 (PANDA): How can I set variabiles !hpdate, !hpmonth.., because
> the sistem can't delete spoolfiles after 3 days (the program compares the
> date, when spoolfiles was created, with variabiles !hpdate, !hpmonth)?
> Now,for example, the command ":echo !hpdate" return "0" to display.
> 2. To S937 (HUSKY): I want set the prompter "MPE/iX:" to "HUSKY/MPE/iX:"
> (before "hello" command). In whom configuration file I can set the prompter
> how I want it to be (HUSKY/MPE/iX:)?
> To S932 (PANDA)the prompter is good: "PANDA/MPE/iX:".
>
> Thank you!
>
> Name: Dinu Iulian
> Company: SC Tractorul UTB SA
> Country: Romania
> Phone: 4068312215
> E-mail: [log in to unmask]
>
>
> ______________________________________________
> FREE Personalized Email at Mail.com
> Sign up at http://www.mail.com/?sr=signup
>


------------------------------------------
Barry Durand           [log in to unmask]
Allegro Consultants    408.252.2330
http://www.allegro.com/people/durand/index.html
Opinions are mine, not my employer's
------------------------------------------