I have a feeling that you are correct in your assumptions.  I'm still
waiting for a call back from Orbit.  Thank you for the input!

> ----------
> From:         Bob Schlosser[SMTP:[log in to unmask]]
> Sent:         Wednesday, June 28, 2000 11:50 AM
> To:   Ramaglia, Jennifer; [log in to unmask]
> Subject:      Re: [HP3000-L] Need to remove console message
>
> Jennifer,
>
> The request message looks strange, the pin number for the reply is zero.
> Have you call ORBIT for help? If the pin number is truly zero (0), then I
> believe you will have to restart the system to clear it.
>
>
>
>
>
> At 11:34 AM 6/28/00, Ramaglia, Jennifer wrote:
> > > Hello everybody,
> > >
> > > I have a console message out there that is insisting that I mount a
> tape
> > > on device 24.  The problem is that the Orbit backup job was aborted by
> a
> > > night operator and does not exist on the system anymore.  How do I
> remove
> > > this message without doing a reboot?  I have tried to do a reply to
> the
> > > PIN # (which is zero).  The system tells me that the process number is
> not
> > > within a valid range.  I also tried an abortio on the device...no
> luck.
> > > Here is the console message and a showdev listing...
> > >
> > > SYS:RECALL
> > > THE FOLLOWING REPLIES ARE PENDING:
> > > 11:01/#J2759/0/Mount tape volume 2 of volumeset unnamed on dev 24
> > >
> > >
> > > SYS:showdev 24
> > >  LDEV     AVAIL         OWNERSHIP         VOLID         DEN
> ASSOCIATION
> > >
> > >    24     AVAIL
> > >
> > > SYS:SHOWJOB #J2759
> > >  NO SUCH JOB(S)
> > > JOBFENCE= 4; JLIMIT= 7; SLIMIT= 256
> > >
> > >
> > >
> > > Thanks in advance!
> > >
> > > Jennifer Ramaglia
> > > Systems Support Specialist
> > > QualChoice
> > > [log in to unmask]
> > >
> > >
>
> Bob Schlosser
>