Jim,

What this probably means is that Predictive IS running and trying to
exchange data with HPRC. However, since your ldev 21 is hung, predictive is
unable to open the port.

You can check to see if Predictive is currently running in
:PSCONFIG.PRED.SYS. To stop a current run you can try:

   :run psconfig.pred.sys;info="STOP"

or you can just run PSCONFIG and navigate the menus.

HTH.

Doug.

Doug Werth                             Beechglen Development Inc.
[log in to unmask]                               Cincinnati, Ohio




----- Original Message -----
From: Jim Phillips <[log in to unmask]>
To: Doug Werth <[log in to unmask]>; <[log in to unmask]>
Sent: Tuesday, May 23, 2000 3:09 PM
Subject: Re: Re: [HP3000-L] Diagnostic System Not Available?


> Doug Werth <[log in to unmask]> writes:
>
> > This usually happens while Predictive is running. Use :RECALL to check
if
> > it is waiting on an operator's request to use the modem which would
> > prevent Predictive from completing its run.
>
> No replies pending...
>
> Jim Phillips                            Manager of Information Systems
> E-Mail: [log in to unmask]     Therm-O-Link, Inc.
> Phone: (330) 527-2124                   P. O. Box 285
>   Fax: (330) 527-2123                   Garrettsville, Ohio  44231
>
>