Tom,

I forgot to also mention you will need to experiment with setup files. For
example, in the 2934 configuration, I specify a setup file that contains the
single command esc-E (the pcl "reset" command).

John Burke

-----Original Message-----
From: HP-3000 Systems Discussion [mailto:[log in to unmask]]On
Behalf Of Tom Madigan
Sent: Tuesday, April 04, 2000 7:36 AM
To: [log in to unmask]
Subject: Network printing to non-JetDirect devices


Fellow HP-3000 Gurus:

I seem to recall reading on this list a few months ago a method by which one
can print from a 3000 to a non-JetDirect printer using the Native Mode
spooler.  I searched high and low, but could not find that particular
message.  Can someone send that piece of mail to me or point me to a
document which shows the solution?

Thanks much!!

Tom Madigan,
HP Systems Manager
International Communications Research, Inc.
605 West State St.
Media, PA 19063-2620
Voice/voice mail:  (610) 565-9280 ext. 450
Facsimile:         (610) 565-2369
Email:             [log in to unmask]

"The opinions expressed in this email posting are strictly those of the
author and are presented for discussion purposes only.  They should not be
taken as any official communication of International Communications
Research, Inc., its affiliates, partners, or parent company."