I had to reconfigure device 21 to do 19200 baud rate and found out that I also
had to do a Ctrl-B at the console and there is a command (do a help) to
configure the remote console modem. Seems like I had a quiet system at the
time, but don't recall if that and a reboot was required or not.
Jeff Baranda wrote:
> Hello, I am trying to install "Nightwatch", a failsafe notification box on
> our HP system using DEV 21. I need to first configure DEV 21 as follows.
>
> Term type = 10
> Line speed = 9600
> Record width = 80
> Modem type = 1
> Modem behavior = 1
> Parity = None
> Speed/parity sensing = N
> Hardware Shaking = N
> Allow Hello = Y
> NL10 Device = N
>
> I tried NMMGR but I do not see where I can set all of these options unless
> it is a profile for my DTC ports.
>
> Thanx in advance.
>
> Jeff Baranda
> FAA Western Federal CU
--
Tom Hula
Victor S. Barnes Company
616.361.7351 x173