Larry, the protocol that DTC'S use is not routable.
You need to bridge to get AFCP through the router.
Try enabling static bridging just for PACKETS destined to/from the DTC. You
will need the MAC addresses of the 3k and the DTC.



At 03:25 PM 2/11/2000 -0700, Larry Barnes wrote:
>I'm currently testing a network setup using Cisco routers and switches,
>and CSU/DSU's (csu/dsu are not cisco).
>
>We have successfully testing the network connecting a pc to the HP3000.
>When the DTC is cirectly connect to the HP3000 via ether-net the DTC's
>configurations is successfully downloaded.  But when we place the DTC on
>the other side of the network the HP3000 can't find the DTC.
>
>If it sounds like I'm rambling I am!
>What must I do to make the HP3000 see the DTC when the traffic passes
>thru the routers.
>
>--
>Larry Barnes
>Director of MIS
>Mitek Corp.
>4545 E. Baseline Rd.
>Phoenix, AZ 85040
>[log in to unmask]
>
Gary L. Biggs, N5TTO
[log in to unmask]
Interex SIG Allbase Chair

"Abandon all hope, Ye who Inter(net) here" --
Dante, over the portal(router) to Hell