Subject: | |
From: | |
Reply To: | |
Date: | Wed, 8 Aug 2001 20:15:23 -0600 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Chris, for CSTM to work correctly, you must have a network up. CSTM needs to
be able to resolve an IP address to a node name. It will look in the NSDIR,
HOSTS.NET.SYS etc to be able to do this. I have fixed a number of these
problems by adding an entry to the HOSTS file.
But this is only part of the problem. If you shutdown your network, without
the diagnostic daemons being shutdown, and then restart your network, the
daemons cannot communicate correctly with the system to obtain the necessary
information. The latest diagnostics patch ODILXG0 (6.5), and ODILXT4 (7.0)
contain the latest fixes, but also contain the stmshut.diag.sys and
stmstart.diag.sys. These programs need to be incorporated into your
processes when you stop and start your network, but are not needed when you
first boot the system. If you do a 'showproc pin=1;system;tree' with the
daemons started you will see:
C13 * 0:33.303 WAIT 55 (/usr/sbin/stm/uut/bin/sys/diagmond)
C13 0:01.526 WAIT 66
(/usr/sbin/stm/uut/bin/sys/diaglogd)
C13 0:01.544 WAIT 56 (/usr/sbin/stm/uut/bin/sys/memlogd)
The stmstart and stmshut will stop and start these daemons.
Regards
Richard Bayly
Hewlett-Packard Enterprise Solution Centre, Australia
"Chris Schofield" <[log in to unmask]> wrote in message
news:n2Pb7.13647$EQ6.89295@NewsReader...
> Hi Everyone
>
> I am having the following problem on MPE 7.0.
>
> :cstm
> Running command file (/usr/sbin/stm/ui/config/.stmrc
>
> This operation may take appromimately one minute.
> Waiting to obtain host information from the local host HPNODE.STD.STD.
> The diagnostic daemon "diagmon" may have been started recently and is busy
> building the device map.
>
> If this message persists for a long time, It is possible that either the
> diagnostic daemon is not running or that the network is improperly
> configured.
>
> If you cancel this message, the User Interface (UI) will not automatically
> connect to a Unit Under Test (UUT). It will necessary
> to use the Select Current System command in the System menu to attach the
UI
> to a UUT.
>
>
> I have read previous messages on this subject and note from Wesley Setree
> and Art Bahrs that I should interrupt the process with Control-Y and
restart
> the processes.
>
> My problem is that cstm does not return to pompt after Control-Y.
>
> Any more ideas ?
>
> Regards
>
> Chris
>
>
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|
|
|