Jeff wrote:
> Mike Liening wrote:
> > Just purchased some JetDirect/EX boxes for some printers so I can send
> > 3000 output over our network (using BOOTP in SpoolMate).
 
> Enter configuration mode...
 
[Arcane cisco incantations omitted]
 
Another thing to keep in mind is that it doesn't matter what system
performs the BOOTP server function for the printer.  If you have a server
(UNIX or otherwise) on the same subnet as the printer then you might find
it simpler to use that server to BOOTP the printer than both getting the
routers to cooperate and running bootpd on the 3000.
 
G.