If you are manually doing this there is a third type of step you need to perform.
You need to HOME the desired groups in the account to the user volume:
:altgroup pub.acct;homevs=VSET_NAME_HERE
Repeat for every group desired.
Otherwise the default for every for every intended instance (restores, user logons) will point to groups on the system volume.
(My example uses 'pub' above because you get at least one pub group by default, you may have others.)
Tracy Johnson
Office (757) 766-4318
[log in to unmask]
> -----Original Message-----
> From: HP-3000 Systems Discussion [mailto:[log in to unmask]] On
> Behalf Of Gary Robillard
> Sent: Wednesday, August 08, 2012 7:28 AM
> To: [log in to unmask]
> Subject: Re: [HP3000-L] Recovery on Private volume group
>
> Hi Mats,
>
> You also need a newacct on the VSET_NAME_HERE volume set before you
> can create the groups with the ;ONVS=VSET_NAME_HERE...
>
> :newacct acct,mgr <<-- create on sys volume
> :newacct acct,mgr;onvs=VSET_NAME_HERE <<-- create on user volume
>
> ---- Nyberg Mats <[log in to unmask]> wrote:
> > Hi.
> >
> > This is exactly what I did, but I can't see any data at all on
> the private_volumeset after the restore was succeeded.
> >
> > I was also created the accounts, before the restore. Maybe this
> is the reason why the data not goes to the right place.
> >
> > I will delete the accounts, and try again.
> >
> > Thanks
> >
> >
> > Best regards
> >
> >
> > Mats Nyberg
> > Systemkonsult
> >
> >
> >
> >
> > Direkt: +46 31 744 51 37
> >
> >
> > [log in to unmask]
> >
> > -----Original Message-----
> > From: Gilles Schipper [mailto:[log in to unmask]]
> > Sent: den 8 augusti 2012 03:08
> > To: Nyberg Mats; [log in to unmask]
> > Subject: Re: [HP3000-L] Recovery on Private volume group
> >
> > The easiest way to re-create the User Volume-set directory is to
> simply restore it from your backup - assuming it was stored there
> in the firt place.
> >
> > Following your "INSTALL" - and after using VOLUTIL to re-create
> your User volumeset disc environment, you simply need to:
> >
> > :file t;dev=tape
> > :restore *t;;directory
> >
> > After that, the subsequent restore should restore all groups and
> files to their proper location.
> >
> > You don't need to go through the un-reliable BULDACCT process -
> unless you failed to backup all appropriate directories on your
> backup.
> >
> >
> >
> > At 07:34 AM 2012-08-07, Nyberg Mats wrote:
> > >Oj, en till:)
> > >
> > >Thanks' for very fast response,
> > >
> > >I will coming back with the STORE and RESTORE command, with all
> options.
> > >
> > >The restore was succeeded but it seems that the data is restored
> to
> > >MPEIX_SYSTEM_VOLUME_SET.
> > >
> > >Best regards
> > >
> > >
> > >
> > >[cid:image001.gif@01CD74A1.51500DD0]
> > >
> > >Mats Nyberg
> > >Systemkonsult
> > >
> > >Direkt: +46 31 744 51 37
> > >[log in to unmask]<mailto:[log in to unmask]>
> > >
> > >From: Per Östberg [mailto:[log in to unmask]]
> > >Sent: den 7 augusti 2012 13:11
> > >To: Nyberg Mats
> > >Cc: [log in to unmask]
> > >Subject: Re: [HP3000-L] Recovery on Private volume group
> > >
> > >(Oj, en svensk!)
> > >Greetings
> > >
> > >how did you create the accounts?
> > >what's your :RESTORE command (and what was the :STORE command)?
> > >any errors?
> > >does "no data goes to the private volume set"
> > >mean that it's not being restored or that it ends up in the
> SYSTEM_VOLUME_SET?
> > >
> > >It's been too long since I've done anything on a 3k, but iirc,
> > >accounts (and groups) should be created wiht an ;ONVS argument.
> Maybe
> > >there is an ;ONVS arg for :RESTORE (as there is for :STORE)?
> > >
> > >I trust you'll get more informed answers as soon as they start
> to
> > >wake up on the other side of the Atlantic.
> > >
> > >regards
> > >/per
> > >
> > >2012/8/7 Nyberg Mats
> > ><[log in to unmask]<mailto:[log in to unmask]>>
> > >Hi everyone
> > >
> > >
> > >I wonder if anybody knows how to do a recovery on private volume
> set?
> > >
> > >The scenario is: A new disk storage system Have a complete
> backup
> > >from the old disk storage system, and a SLT tape as well.
> > >I have create the accounts on the new disk storage system, also
> add
> > >the private volume with the volutil When trying to do a restore,
> no
> > >data goes to the private volume set
> > >
> > >...
> > >--
> > >\---------------------------------------------------
> > > \ Per Östberg \ [log in to unmask]<mailto:[log in to unmask]>
> > > |Stambanev 33, 141 43 Huddinge
> > > / 08-7110778 / 070-0017627
> > >/---------------------------------------------------
> > >
> > >* To join/leave the list, search archives, change list settings,
> *
> > >* etc., please visit http://raven.utc.edu/archives/hp3000-l.html
> *
> >
> > -----------------------------------------------------------------
> -----
> > ---------------------------
> > Gilles Schipper
> > GSA Inc.
> > HP System Administration Specialists
> > 300 John Street, Box 87651 Thornhill, ON Canada L3T 7R4
> > Tel: 416.702.7900
> > email: [log in to unmask] web: http://www.gsainc.com
> > -----------------------------------------------------------------
> -----
> > ---------------------------
> >
> > * To join/leave the list, search archives, change list settings,
> *
> > * etc., please visit http://raven.utc.edu/archives/hp3000-l.html
> *
>
> * To join/leave the list, search archives, change list settings, *
> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|
