Look at all of HPSWINFO on the system you upgraded - Express-1 patches
should be listed in the second half of the file.

Pre-loaded systems are a different animal altogether.

> -----Original Message-----
> From: John MacLerran [mailto:[log in to unmask]]
> Sent: Thursday, August 29, 2002 2:02 PM
> To: [log in to unmask]
> Subject: [HP3000-L] How to tell if 7.0 Express 1 was installed
> successfully?
>
>
>  Hi Everyone,
>
> I recently upgraded our HP 3000 969-ks/400 from MPE 6.0pp2 to 7.0
> express 1. I followed the instructions in the Software Maintenance
> Manual, and all the steps there went okay. The process asked
> for the FOS
> tape, our prod/subsys tape, and the express 1 tape. However, when I do
>
> :SHOWME
> USER: #S52,MANAGER.SYS,JOHN      (NOT IN BREAK)
> RELEASE: C.70.00   MPE/iX HP31900 C.39.06   USER VERSION: C.70.00
> CURRENT: THU, AUG 29, 2002,  2:44 PM
> LOGON:   THU, AUG 29, 2002,  2:37 PM
> CPU SECONDS: 1         CONNECT MINUTES: 7
> $STDIN LDEV: 226         $STDLIST LDEV: 226
>
> It appears not to know that I've put the express 1 patches on. Our
> N-Class box, which came with 7.0 Express 1 pre-loaded reports:
> /showme
> USER: #S2107,MGR.ISU,JOHN       (IN PROGRAM)
> RELEASE: C.70.01   MPE/iX HP31900 C.39.06   USER VERSION: C.70.01
> CURRENT: THU, AUG 29, 2002,  2:46 PM
> LOGON:   THU, AUG 29, 2002, 11:26 AM
> CPU SECONDS: 1         CONNECT MINUTES: 200
> $STDIN LDEV: 384         $STDLIST LDEV: 384
>
>
> Furthermore, when I print the first few lines of
> HPSWINFO.PUB.SYS, I get
> the following:
>
> :print hpswinfo.pub.sys
> *******************************************************************
> **                                                               **
> **              *** MPE/iX MIT C.70.00  ***                      **
> **                                      POWERPATCH C7001 P6      **
> **              THU, MAR  1, 2001,  5:02 PM                      **
> **                                                               **
> **     LIST OF HEWLETT PACKARD COMMERCIAL SOFTWARE PRODUCTS      **
>
>
> While on our N-Class box with 7.0 express 1 preinstalled:
>
> /print hpswinfo.pub.sys
> *******************************************************************
> **                                                               **
> **              *** MPE/iX MIT C.70.01  ***                      **
> **                                      POWERPATCH C7001 P6      **
> **              TUE, MAY 22, 2001, 12:47 PM                      **
> **                                                               **
>
>
> So, even though I followed all the steps, and they all looked
> like they
> ran properly, it doesn't appear that I got the Express 1 installed
> properly. Is there any other way for me to tell?  If the
> install didn't
> go correctly, can I just reinstall the Express 1 as a
> PowerPatch, or do
> I need to do the complete reinstall process again.
>
> Thanks!
> Wondering in Idaho...
> ----------------------------------------------------------------------
>    John MacLerran
>    IT Systems Analyst                       email:   [log in to unmask]
>    Idaho State University                             V(208) 282-2954
>    http://www.isu.edu/~macljohn                       F(208) 282-3673
> ----------------------------------------------------------------------
>
> * To join/leave the list, search archives, change list settings, *
> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *