Try taking about the jam line and stick in the snmp line. Be sure to stop the spooler for this printer while you're
editing npconfig. - d
---
Donna Hofmeister
Allegro Consultants, Inc.
408-252-2330
> -----Original Message-----
> From: HP-3000 Systems Discussion [mailto:[log in to unmask]] On Behalf Of Tom Hula
> Sent: Monday, October 03, 2011 7:13 AM
> To: [log in to unmask]
> Subject: Re: [HP3000-L] Another HP Printer Puzzle
>
> I can check for that tomorrow. As far as I know, there are no requests. It
> definitely isn't setup as a form
> and the out priority is higher than the fence, as evidenced by the fact that
> simply stopping and starting
> the spooler gets the spool file printing.
>
> I can have this file directed elsewhere, like to our Ricoh Copier with the
> same jobstream and it works
> as it should.
>
> The NPCONFIG for the printer looks thusly:
> 1002 (network_address = 192.168.100.117 # Laserjet P3015 - SCOTT
> setup_file = PCLELITD.HPENV.SYS
> pjl_supported = FALSE
> jam_recovery = TRUE
> banner_intray = 0
> data_intray = 0)
>
> I'm not exactly sure now, what is in that setup file or why I chose it eons
> ago.
>
> Tom
>
> -----Original Message-----
> From: Francois Desrochers
> Sent: Monday, October 03, 2011 9:50 AM
> To: Tom Hula
> Subject: RE: [HP3000-L] Another HP Printer Puzzle
>
> Tom,
>
> Any outstanding reply on the console?
>
> François
>
> -----Message d'origine-----
> De : HP-3000 Systems Discussion [mailto:[log in to unmask]] De la part
> de Tom Hula
> Envoyé : Monday, October 03, 2011 9:31 AM
> À : [log in to unmask]
> Objet : [HP3000-L] Another HP Printer Puzzle
>
> This is the HP P3015dn printer that was automatically duplexing on 2
> reports...that is no longer an issue.
>
> However, I do have an anomaly of sorts.
>
> Every day, since we have put that printer into production, one of those
> reports
> I had auto duplexing issue on is generated on the 3000, but not printing.
>
> At first, I thought it was that a temporary networking issue,
> but it happens every day...to just that report in that single job.
>
> All I have to do is stop and start the spooler and it prints just fine.
>
> If I use an option to reprint that report on the menu, which runs the same
> program,
> it always prints.
>
> The print file doesn't appear to be deferred. It just sits there, waiting
> for the bus to go by.
>
> Anyone encounter anything like this before?
>
> Tom Hula
> Victor S. Barnes Company
>
> * To join/leave the list, search archives, change list settings, *
> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>
> * To join/leave the list, search archives, change list settings, *
> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|
