I've seen this happen with Reflection where where HPTYPEAHEAD has been enabled.

Try issuing the following command before executing NMMGR:

:setvar hptypeahead false


At 08:58 PM 2004-11-24, john pitman wrote:
>NMMGR does not run under reflections(R12 or R7) for us, even on
>VT-MGR.....it gives a lock symbol at bottom right. If I soft reset it and
>Enter, I get
>
>Terminal is of incorrect type or cannot be opened. (NMGRERR 1).
>The Terminal Status request failed.
>
>
>??
>we live with it by going to console, and moving logical console
>elsewhere....
>It works fine under qcterm telnet.
>What setting can I have wrong such that this is the only sign of a problem?
>
>jp
>-----Original Message-----
>From: [log in to unmask] [mailto:[log in to unmask]]
>Sent: Thursday, 25 November 2004 11:49 AM
>To: [log in to unmask]
>Subject: Re: [HP3000-L] Serial device FDEVICECONTROL question
>
>John,
>
> > NOT Page mode.....even in reflections
>
>You must be doing something wrong. NMMGR is a page mode, block mode
>application, and it certainly works well under telnet, in Reflections or
>QCTerm.
>
>Best,
>
>Wirt
>
>* To join/leave the list, search archives, change list settings, *
>* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *

-------------------------------------------------------------------------------------------------
Gilles Schipper
GSA Inc.
HP System Administration Specialists
300 John Street, Box 87651   Thornhill, ON Canada L3T 7R4
Voice: 905.889.3000     Fax: 905.889.3001
email:  [log in to unmask]  web: http://www.gsainc.com
-------------------------------------------------------------------------------------------------

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *