Assuming:

1. Windows 95/98 client
2. JD3 has the default ip address of 192.0.0.192
3. Both are physically connected to LAN

Go to DOS prompt and type:

route add   192.0.0.192   ipaddress_of_your_windows_client

Now you can telnet to 192.0.0.192 and configure the JD3 with new ipaddr.,
subnet mask, default gateway, etc.

Once you save your changes, your telnet connection will be severed because
you have changed the ip address.



At 11:11 AM 1999-10-24 -0600, Curt Brimacomb wrote:
>Help!
>
>We have moved to a new building and are using a new Class C.  Therefore new
>IP's are being setup for the HP3000's, PC's, and printers using jetdirect
>boxes.  I setup a new LJ4050N without any problem.  But I try to take the
>old LJIIID using a jetdirect external 3 port box, and all I have been able
>to do is erase the old config.
>
>Can someone tell me how to put new IP's into the jetdirect box?  It has been
>over 2 years since I did it the first time and I must say that my notes are
>not helping.
>
>TIA
>
>Curt Brimacomb
>www.idahocomputer.net
>Systems Manager
>www.datanow.net
>Idaho Computer Services, LLC.
>www.magiclink.com
>PO Box 446
>[log in to unmask]
>Twin Falls, ID 83301
>208-734-2245
>
>
---------------------------------------------------------------------------
Gilles Schipper
GSA Inc.
HP3000 & HP9000 System Administration Specialists
300 John Street, Box 87651   Thornhill, ON Canada L3T 7R4
Voice: 905.889.3000     Fax: 905.889.3001
Internet:  [log in to unmask]
---------------------------------------------------------------------------