Seems like a candidate for turning off the page level recovery.

-------------------------------------------------
Larry Simonsen                Phone: 801-489-2450
Flowserve Corporation     Fax: 801-491-1750
PO Box 2200                    http://www.Flowserve.com
Springville, UT 84663      e-mail: [log in to unmask]
-------------------------------------------------
All opinions expressed herein are my own and reflect, in no way, those of my
employer.

 -----Original Message-----
From:   Kemal Mavi [mailto:[log in to unmask]]
Sent:   Thursday, May 25, 2000 12:20 AM
To:     [log in to unmask]
Subject:        Network Printing ? Mission: Impossible

Hello All,

I am exactly interested in the same problem.  Any further info will be
appreciated.
(Just for information, HP is investigating the problem. If I get a
feedback,  I'll forward it to list).

TIA,
Kemal.




Ronald La Pierre <[log in to unmask]>@RAVEN.UTC.EDU> on 24/05/2000
08:23:25 PM

Please respond to Ronald La Pierre <[log in to unmask]>

Sent by:  HP-3000 Systems Discussion <[log in to unmask]>


To:   [log in to unmask]
cc:
Subject:  Network Printing


I am trying to print from an HP3000 959/200 5.5 PP7 to a Konica IP-303
(65ppm printer).  There is an HP JetDirect EX Plus (J2591A), firmware
E.05.13 attached to the printer.  When we try printing to it we get the
following error:

10:33/120/Output spooler, LDV #651:  The IPCRECV intrinsic reported
error 64 while waiting for a generic event completion.  The error text is:
REMOTE ABORTED THE CONNECTION. (SOCKERR 64)
Native Mode Spooler message 9646

I then hooked the jet direct device up to a LJ 4 Plus.  I can print but
after the report (1 pager)I get an error indicating there was a power
failure on the device and it sends it again. The spoolfile never gets
purged on the HP3000 (it just loops and loops).

1. Has anyone done this kind of IP connection with a non HP printer.

2. Has anyone used this model of jet direct card and had it work.

Thanks in advance for any input with this problem.