Greetings;
    I have a Panasonic KX-P4420 with the optional serial card. It works
great connected to a 917lx DTC 16 using printer type=18, baud=9600,
parity=none, modem behavior=0,
modem type=0, initially spooled=yes, NLIO device=no, and hardware
handshaking=no.
The 917 is running 5.5 PP4. When the same printer is connected to a 960
on 5.0 using
a DTC 48 with the exact same Profile settings, the spooler indicates
that the device is
off-line and stops. It would be nice to just go to 5.5 on the 960 but I
can't do that in the
near future. Any Ideas ???


                                                            Thanks in
advance;
                                                            Dave