No, All system space.

-----Original Message-----
From: Brian Duncombe [mailto:[log in to unmask]]
Sent: Wed, December 26, 2001 6:14 PM
To: NTC John Pitman
Subject: Re: [HP3000-L] N series on 7.0


At 02:44 PM 12/24/2001 +0300, you wrote:
>Hello all,
>
>Acquaintance of mine has just transitioned from a 957, I think on 6.?, to a
>new N series, 220Mhz on 7.0 . They have ~150 users, some on Muxs
distributed
>around the local city, others in remote cities with their own DTCs over
>Frame Relay etc. The transition has basically been painless, but for one
>small item. On the 957 the response was stable and predictable, with only
>one or two heavy load, well known activities that had any impact. On the N
>however, there are fairly regular pauses in response that initially look
>like connection lost, or system hung or a very heavy load has taken over.
>These pauses are about 3-5 seconds long, spread over all the local
>connections that I know of - not sure if everybody sees the same pauses at
>the same time.
>The i/o config was basically copied over from the 957, with a few extra
>ldevs configured, but no significant changes.
>
>Is there something in 7.0 that we need to configure or check, or......
?????

Did the 957 use "User Volumes" or was everything in the "System Volume" set?
Did this change on the N Class?


>Appreciate any tips you can think of.
>
>TIA,
>
>John Pitman
>NTC Riyadh
>01) 477 4710 X 1104
>
>* To join/leave the list, search archives, change list settings, *
>* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *


Brian Duncombe  [log in to unmask]  http://www.triolet.com
voice: 1-877-TRIOLET (874-6538) (905)632-2773 fax: (905) 632-8704
"Inside every large program is a small one struggling to get out"
C.A.R. Hoare

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *