> From:          Tim Ericson <[log in to unmask]>

>
> We did this just yesterday.  5.5 pp2 to 5.5 pp4 (with express 3 subsys)
> using Patch/iX *AND* 5.0 pp2 to 5.5 pp4 using Autoinst.
...snipped...
> The major problem occured this morning when 40 dental offices and the
> appointment center tried to log on (with 700/92s on 5 DTCs) there was
> no system prompt!

Hmmm.    We just had a similar DTC problem, but with telnet
connections, not serial(just went from 5.5 exp2 to exp3).  Telnet
sessions would get the 'Connecting...' message and then hang forever.
NSVT was fine.

I could ping the DTC and Telnet card successfully from the HP3000 and
the user could successfully connect to the DTC, but the DTC was not
passing that through the user connection to the HP3000.

> I suspect NMMGRVER (run during the upgrade

I do as well.

Rather than debug the DTC problem, I upped my priority to implement
the Telnet server directly on the HP3000. Telnet users are now back
on and the DTC and Openview station will soon be shut down.

Bob.
--=--=--
Bob Walker, Computer Centre  --  [log in to unmask]
Capilano College, North Vancouver, BC, CANADA.
------