HP3000-L Archives

April 2015, Week 3

HP3000-L@RAVEN.UTC.EDU

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Gary Robillard <[log in to unmask]>
Reply To:
Gary Robillard <[log in to unmask]>
Date:
Thu, 16 Apr 2015 13:23:00 -0400
Content-Type:
text/plain
Parts/Attachments:
text/plain (96 lines)
What does TERMDSM.DIAG.SYS indicate?

On Thu, Apr 16, 2015 at 1:08 PM, Gilles Schipper <[log in to unmask]> wrote:

> check if you've configured max. no. of non-nailed devices somewhere in the
> dtc config within nmmgr
>
> On 2015-04-16 1:07 PM, Craig Lalley wrote:
>
>> Yes, I had the changes take affect now, but it said it could not do it,
>> but to reboot the DTC which I did.
>>
>> I did try a reboot with start norecovery.   Still no good.
>>
>> Any ideas?
>>
>> -Craig
>>
>> ------------------------------------------------------------------------
>> *From:* Gilles Schipper <[log in to unmask]>
>> *To:* [log in to unmask]
>> *Sent:* Thursday, April 16, 2015 10:03 AM
>> *Subject:* Re: DTC woes...
>>
>> Should work fine.
>>
>> You say you configured all of the ports in NMMGR.
>>
>> An presumably, you answered affirmative to question about effecting
>> configuration changes now.
>>
>> Did you try rebooting with a start norecovery?
>>
>>
>>
>> On 2015-04-16 12:54 PM, Craig Lalley wrote:
>> > OK, I was never a really big fan of DTC's but I always seemed to be
>> able to make them work.
>> > This time I am at a loss, I think I must be missing something obvious.
>> > I am trying to connect a DTC16mx to an A-class.  I have the MAC address.
>> > I put the mac address into NMMGR and configure the DTC.  The DTC
>> messages of download started and completes show on the console.
>> > So it looks like I have fully communication to the DTC from the A-class.
>> > Next I am trying to hook up a terminal to the first port (I tried them
>> all) in the DTC and the message I am getting on the terminal is
>> > can't establish the connection  (DTC01)
>> > It is like host switching is enabled, but that is not possible (that I
>> know of) with NMMGR.
>> > Has anyone dealt with this one before?
>> > -Craig
>>
>> >
>> >
>> > * To join/leave the list, search archives, change list settings, *
>> > * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>> > .
>> >
>>
>> --
>> -----------------------------------------------------
>> Gilles Schipper
>> GSA Inc.
>> HP System Administration Specialists
>> PO Box 77566 RPO Sheppard Plaza
>> Toronto ON M3H 6A7 Canada
>> Tel: 416.702.7900
>> email: [log in to unmask] <mailto:[log in to unmask]>
>> web: http://www.gsainc.com <http://www.gsainc.com/>
>> -----------------------------------------------------
>>
>> * To join/leave the list, search archives, change list settings, *
>> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html
>> *
>>
>>
>>
> --
> -----------------------------------------------------
> Gilles Schipper
> GSA Inc.
> HP System Administration Specialists
> PO Box 77566 RPO Sheppard Plaza
> Toronto ON M3H 6A7 Canada
> Tel: 416.702.7900
> email:  [log in to unmask]
> web: http://www.gsainc.com
> -----------------------------------------------------
>
>
> * To join/leave the list, search archives, change list settings, *
> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *

ATOM RSS1 RSS2