Thanks, Keven!

Yes, our free DMESG utility displays the bootup messages from the most
recent bootup.
(Unless you save them yourself, nothing can reach into the past and get the
messages from the prior bootup.)

https://www.allegro.com/?page_id=77


On Thu, Oct 29, 2020 at 1:24 PM Keven Miller(3k) <[log in to unmask]>
wrote:

> Check at Allegro.com for DMESG.
>
> Keven
>
> Fox 9:dmesg.pub
> DMESG 94A             Copyright (c) 1994  Allegro Consultants, Inc.
> Author: Stan Sieler                              [log in to unmask]
> THU, OCT 29, 2020,  1:17 PM;                         #lines: 104
>
> -------------------------------------------------------------------------------
> ..
> ..
> Initialize genesis completed.
> Create Console Messages kso completed.
> Initialize memory manager completed.
> Initialize resident kernel completed.
> Initialize volume management and mount the System Disk
> Initialize volume management completed.
> Opening the native system library completed.
> Initialize loader completed.
> I/O boot path managers frozen in memory completed.
> Vsm make no longer resident completed.
> Initialize process management completed.
> Initialize debug subsystem completed.
> Initialize file system completed.
> Initialize temporary UID/GID Databases completed.
> Initialize non-resident services completed.
> Begin binding compatibility mode SL
> Compatibility mode SL binding complete
> Create port process has been completed.
>
> The following is a list of the boot options -
>    last boot command:    START          last configuration group:    CONFIG
>    current boot command: START          current configuration group: CONFIG
>    Last configuration group actually used by START: CONFIG
>    logon = OPERATOR.SYS
>    NORECOVERY                           MULTI-USER
>    MULTI-DISK                           SYSSTART
>
> Entering - System I/O configuration.
> The path 56 has already been configured.
> The path 56/52 has already been configured.
> The path 56/52.1.0 was configured but is not available.
> The path 56/52.2.0 was configured but is not available.
> The path 56/52.6.0 has already been configured.
> The path 56/52.9.0 was configured but is not available.
> The path 56/56 has already been configured.
> The path 56/56.0 has already been configured.
> Leaving -  System I/O configuration.
>
>                       SYSTEM I/O AT BOOT TIME
>
> ldev:    1          ST15150N  configured      available  56/52.6.0
> ldev:    2          ST32171N  configured      available  56/52.5.0
> ldev:    3         ST318416N  configured      available  56/52.4.0
> ldev:    4         ST318416N  configured      available  56/52.3.0
> ldev:    5       DVD-ROM-305  configured  not-available  56/52.1.0
> ldev:    6           HPTCPJD  configured      available  NONE
> ldev:    7          HPC1537A  configured      available  56/52.0.0
> ldev:    8            A3716A  configured  not-available  56/52.2.0
> ldev:   10        JOBTAPE_ID  configured  not-available  56/52.9.0
> ldev:   20  A1703-60003-CONS  configured      available  56/56.0
> ldev:   21  A1703-60003-CONS  configured      available  56/56.1
> ldev:   22          HPA2941A  configured      available  56/56.3
> ldev:   23           HP7978B  configured  not-available  56/40.0.3
> ldev:   24          HP7980XC  configured  not-available  56/40.0.4
> ldev:   50           HPTCPJD  configured      available  NONE
> ldev:  200           HPTCPJD  configured      available  NONE
> ldev:  201           HPTCPJD  configured      available  NONE
> ldev:  202           HPTCPJD  configured      available  NONE
> ldev:  203           HPTCPJD  configured      available  NONE
> ldev:  204           HPTCPJD  configured      available  NONE
> ldev:  205           HPTCPJD  configured      available  NONE
>
> MEMORY AVAILABLE FOR USE (bytes): 536870912
>
> Entering - Mount all volumes
> Mounting MASTER on LDEV            4
> Mounting MASTER on LDEV            3
> Mounting MASTER on LDEV            2
> Mounting MASTER on LDEV            1
>  Warning  - Volume is not available for mounting.  The ldev is 5
> -- Time spent in MOUNT_ALL_VOLUMES ->        87
> Leaving -  Mount all volumes
> The current boot command has been saved on the system master.
> Successfully launched Optical Media Manager process.
> Successfully launched diagnostic monitor process.
> Successfully launched System UPS Monitor process.
>
> Fox 9:
>
> * To join/leave the list, search archives, change list settings, *
> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *