HP3000-L Archives

May 2011, Week 3

HP3000-L@RAVEN.UTC.EDU

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Craig Lalley <[log in to unmask]>
Reply To:
Craig Lalley <[log in to unmask]>
Date:
Thu, 19 May 2011 11:18:21 -0700
Content-Type:
text/plain
Parts/Attachments:
text/plain (87 lines)
Ryan,

I have some good war stories about bent pins and bad terminators.   :-)

All good now, but they were painful at the time.

-Craig


--- On Thu, 5/19/11, Ryan C. Melander <[log in to unmask]> wrote:

From: Ryan C. Melander <[log in to unmask]>
Subject: RE: [HP3000-L] DLT tape drive...
To: "'Craig Lalley'" <[log in to unmask]>, [log in to unmask]
Date: Thursday, May 19, 2011, 10:11 AM

You are so OLD School.. Craig  :)


Ryan C. Melander
Ideal Computer Services, Inc.
88 Wright Brothers Ave.
Livermore, CA 94551
Ph. 800-862-8787
Ph. 925-447-4747 x213
Fx. 925-447-4780
mailto:[log in to unmask]


-----Original Message-----
From: HP-3000 Systems Discussion [mailto:[log in to unmask]] On Behalf
Of Craig Lalley
Sent: Thursday, May 19, 2011 10:07 AM
To: [log in to unmask]
Subject: Re: [HP3000-L] DLT tape drive...

Kim,

Same old advice.

Check for bent pins in the cable and replace the terminator.

Good Luck,

-Craig


--- On Thu, 5/19/11, Kim Borgman <[log in to unmask]> wrote:

From: Kim Borgman <[log in to unmask]>
Subject: DLT tape drive...
To: [log in to unmask]
Date: Thursday, May 19, 2011, 9:10 AM

Acting quirky.  Put tape in, not recognizing it.  IE showdev 8 still shows
that it is available.  Do store to it, showdev 8 give it as unavailable, SYS

    8     UNAVAIL       SYS

Did an abortio 8, and it will finally release it.

HP came out and replaced.  Same symptoms.

Sometimes the tape will show mounted (last nite), but then when the store
job runs, it keeps asking to mount a tape.  Or once yesterday in testing, it
kept asking me to answer a reply that the tape was on that device...  when I
reply, keeps coming back with same request.

Anyway, HP tech thinks there is a command to force the system to recognize
the tape.  Short of reboot, any ideas out there ?

If a reboot fails, then I'm thinking we have a board problem....

Mr Kim Borgman
IT mgr, RNDC of Indiana.

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *



* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *

ATOM RSS1 RSS2