Scott,

After saying to myself "What the he** is a rin and grin" I went onto ITRC
and found the following document.....

Increasing GLOBAL and LOCAL RIN values
DocId: MPEKBRC00005601

NOTE:  It is very important to know that GLOBAL and LOCAL RINS cannot be
increased on the system at the same time.   One or the other can
be done in a single pass by creating an SLT with the changes and
then booting the system with an UPDATE CONFIG START NORECOVERY.
Once this is done, the other RINS are changed and the system is
booted again.

HTH

> -----Original Message-----
> From: Scott Swartzell [mailto:[log in to unmask]]
> Sent: Wednesday, March 20, 2002 3:42 PM
> To: [log in to unmask]
> Subject: [HP3000-L] Changing RINS and GRINS
>
>
> Good afternoon all,
>
> I'm on 6.0 PP2 and need to adjust the rins and grins
> on a server.  I know that I need to update from tape, but
> I've been told that I can only make one change at a time.
> Meaning, I change rins, cut an slt, boot from that tape,
> then change grins, cut another slt, boot from that tape,
> then I'm done.
>
> I don't see why I would need to do these separately.  I'd
> like to know if I can just change both rins and grins,
> cut a tape, then boot from it.
>
> Thanks,
> Scott
> --
> ---------------------------------------------
> Scott Swartzell   IT | Information Technology
>              590-2152
> 9/20 - Mt Antero (14,269')
> 8 down, 46 to go.........
>
> * To join/leave the list, search archives, change list settings, *
> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *