Newman, Kevin: writes:
>
> Not bootptab, bootfile.  As in:
>
> printer01: ht=ether: ha=080009030166: ip=15.19.8.2:\
> sm=255.255.248.0: gw=15.19.8.1: bf=/printer01
>
> Note the bf at the end?  This is a bootfile that will be tfpt'd back to
> the printer with configuration information in it.  How do I configure
> that information into the file?

In INETDCNF.NET.SYS:

bootps       dgram  udp wait   MANAGER.SYS /SYS/NET/BOOTPD bootpd -d
tftp         dgram  udp wait   USER.TFTP /SYS/NET/TFTPD tftpd

In BOOTPTAB.NET.SYS:

pp1d640:\
 :ht=ether:\
 :ha=my jetdirect MAC address:\
 :sm=my subnet mask:\
 :gw=my default gateway IP address:\
 :lg=my syslog server IP address:\
 :ip=my jetdirect IP address:\
 :T144="NPPP1":\
 :vm=rfc1048:

In NPPP1.TFTPDIR.TFTP (note: TFTPDIR.TFTP is the home group of USER.TFTP):

idle-timeout: 3600
#
# Place domain name here to avoid overflow of
# the vendor information area in the BOOTP reply.
#
name: my jetdirect host name
location: DIS Machine Room
contact: DIS Machine Room operator, +1 714 438-4740
--
Mark Bixby                      E-mail: [log in to unmask]
Coast Community College Dist.   Web: http://www.cccd.edu/~markb/
District Information Services   1370 Adams Ave, Costa Mesa, CA, USA 92626-5429
Technical Support               Voice: +1 714 438-4647
"You can tune a file system, but you can't tune a fish." - tunefs(1M)