Jim,
Just to make sure...
I know we also use DTC manager and when dealing with the PORTS,
TERMDSM does not recognize our DTC's. But when specifying the LDEV it
does recognize the LDEV.
As in the following. Hope it helps....
---------------------------------------------------------------
Barry Durand "The opinions expressed in this
Systems Engineer II email are not necessarily the
Gulf South Health Plans opinions of my employer"
[log in to unmask]
---------------------------------------------------------------
:SYSDIAG
*****************************************************************
<stuff deleted>
*****************************************************************
DUI >TERMDSM
*******************************************************************
<stuff deleted>
*******************************************************************
Welcome, Today is FRI, APR 10, 1998 at 2:49 PM
There are no DTCs configured on your system. (TDSM 70)
Connect DIag DTc DUmp EEprom Help Reset Status Trace EXit
?RESET
NOTE: <stuff deleted>
(reset)
Ldev #
POrt #,#,#
SNp #,# (X.25 card in DTC)
VC #,#,#
SIc #,# (multiplexer card in DTC)
DTc #
(carriage return to exit) ?LDEV 405
NOTE: <stuff deleted>
(reset)
Ldev #
POrt #,#,#
SNp #,# (X.25 card in DTC)
VC #,#,#
SIc #,# (multiplexer card in DTC)
DTc #
Connect DIag DTc DUmp EEprom Help Reset Status Trace EXit
?EXIT
TERMDSM Exiting...
TERMDSM has terminated
DUI >EXIT
END OF PROGRAM
:
******************************************************************
______________________________ Reply Separator
______________________________
Subject: A fine state of affairs
Author: "Trudeau James Lhrl" <[log in to unmask]> at
SMTP-PO
Date: 4/10/98 1:05 PM
> Howdy,
>
> And many thanks to all who supplied suggestions as to how to > kill
this session.
>
> TERMDSM won't work. Summon TERMDSM and it tells me that > none of
our 4 DTC's exist. Interesting.
>
> The reason I have this serial connection is that when there is a >
network outage (or some other screw up) I can stay connected
> to the 3000 from my desk instead of having to go to the machine >
room and work from the console; that machine room is right
> crowded and noisy (plus I tend to take out my frustrations by >
assulting the 9000 and management gets nervous). I haven't
> quite yet got it figured out how I can be connected to the DTC
> the DTC connected to the network (LAN), kill all network services
> and still latch up to the 3k. Got something to do with DTC Manager
> and AFCP (?) I suspect.
>
> Anyhow, it appears that the long and short of it is that I will be
in > Sunday to IPL the system :-(
>
> See? See? I get into POSIX and a perfectly good 3000 starts >
acting like a 9000 :-( Someday I'll bore y'all with some file >
system stories.
>
> Tx for all the advice
> Jim Trudeau
>
|