>> hi, folks-
>> We're attempting to attach an adds terminal to our 928 via the DTC16/MX,
>> and I've floundered for about 45 mins. The others decided to go home for
>> the night, and I will soon, but thought I'd ask here for ideas. The
>> terminal communications is set for 9600 baud, no parity, 1 stop bit and
>> x-on/x-off flow countrol. Nothing odd there. We've tried straight thru
>> cables, cross over cables, nul modems, and two different ports on both
>> the direct connect pannel and the modem pannel. Anyone see what I am
>> misssing?
assuming your configs are all ok, you have powercycled the dtc, etc..does a
2392a term work?
1. make sure the adds terminal port is not dead;
Check for loopback, use a real looper or a psuedo loopback (fabricated from a
paperclip, short pins 2,3 on the terminal), you should be able to see what
your typing on the screen. If you do, then move your paperclip to the very
end of the cable, (the end that would plug into the dtc) try again...all ok?
then .
When you hit return, do a showdev from another terminal that is working, do you
get a 'sys #1' on the adds port with the cable connected to the dtc? If you
do, then the data is making it at least one direction, I have had a dtc port
die and still pass all self tests.
Jim Sanders
Is there Life after HP3000?
|