1. STORE all data of the accounts TEST and PROD on SysVol.
Verify the Store.
2. create account structure for Private Volume PV:
use
BLDACCT.PUB.SYS INFO="PROD,TEST%VSACCT=PV"
to get BULDJOB1 and BULDJOB2 to be streamed in step 4 and 6.
3. Purge the accounts TEST and PROD.
4. stream BULDJOB1.
This job will create/adapt the accounts on the PV.
5. Restore all data. It will be put on the PV.
6. Stream BULDJOB2 to re-set the UDCS.

Best regards, Andreas Schmidt, CSC





[log in to unmask] on 14/11/97 07:48:35 PM

Please respond to [log in to unmask]

To:   [log in to unmask]
cc:    (bcc: Andreas Schmidt/HI/CSC)
Subject:  Creating a Private Volume Group?




A couple of weeks ago we lost a day of production because of a disc
drive failure (first time in 10 years). Today all 10 drives are part of
the system volume group.  I know we should have created a private volume
earlier, but it is easier to add 1 or 2 new drives every 6 months.
We have an EMC box available that we can connect to the HP3000 969/400.
We have four 4G internal drives that we will retain and configure part
or all of these as the system volume group. The drives on the EMC box
will be configured as a private volume group.  I can handle everything
that is going back to the system volume group.  What is the best way to
move accounts from one volume group to another?  For example, what will
I have to do to move the accounts PROD and TEST from the system volume
to the data volume group?  Can this be done without having to recreate
everything manually?
TIA
Roger "I should be fishing" Smith               [log in to unmask]
ADTRAN, Inc.