Art Bahrs wrote:
> Hi Jan ;)
> Yes, I have the printer hooked up to the first Parallel port on a HP
> JetDirect 500X 3 port box... and the printer is a brand new Epson FX-880+.
>
> My NPCONFIG entry is:
>
> 4007 (network_address = 10.10.0.135 # Label Printer at Info Sys
> pjl_supported = FALSE # turn off pjl support.
> jam_recovery = FALSE
> setup_file = EPSONLBL.HPENV.SYS) # Label Env Mode
>
> I am using the following commands in my setup file for the printer:
>
> <esc> E
> <esc> @
> <esc> P
> <esc> C1
> <esc> l4
> <esc> Q49
> <esc> k2
> <esc> 0
>
> Thanks for any help :)
>
> Art
>
> ----- Original Message -----
> From: "Jan Gerrit Kootstra" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Wednesday, February 06, 2002 12:02 PM
> Subject: Re: [HP3000-L] Network Printing to Dot Matrix Printers
>
> > Art Bahrs wrote:
> >
> > > Hi All :)
> > > Does anyone out in Listland have dot matrix printers hooked up to
> their
> > > 3k's as network printers? If so I would love (and really need) some
> help on
> > > this.
> > >
> > > Thanks,
> > > Art "really stumped" Bahrs
> > >
> > > * To join/leave the list, search archives, change list settings, *
> > > * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
> >
> > Art,
> >
> >
> > Does your dot matrix printer have a networkconnection at the moment? If
> not we
> > recommend our clients to use
> > external Hewlett Packard jetdirect boxes.
> >
> > Ones you have done that, I can help you further by direct email. I will
> keep
> > the newsgroup posted, but I have only
> > Usenet access at home and not at work right now.
> >
> >
> > --
> > Regards,
> >
> > Jan Gerrit Kootstra
> > System Engineer
> > PinkRoccade Online BV
> > PhD Student CFD and Numerical Math
> > University of Groningen (RuG)
> > [These opinions and remarks are my own, and may not reflect policies of
> PinkRoccade or RuG.]
> >
> > * To join/leave the list, search archives, change list settings, *
> > * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
Art,
You'll need to specify the tcp/ip port of to direct to the first parallel port
of the jetdirectbox. I think it is tcp_port_number=9001.
Please try that, if that does not work I'll get back to you around 09:30 hours
MET (GMT+1)
--
Regards,
Jan Gerrit Kootstra
System Engineer
PinkRoccade Online BV
PhD Student CFD and Numerical Math
University of Groningen (RuG)
[These opinions and remarks are my own, and may not reflect policies of PinkRoccade or RuG.]
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|
