Bill,

When are you seeing this error?  If you're getting some kind
of 'duplicate volume mounted' message when you boot up after the
install, you can probably ignore it.

Have you tried adding the disks to a volume set with volutil?

I might suggest adding the devs other than dev1 to a private volume
and seeing if you can write a file or files to the volume.  Then you
can scratch the volume and add them to the correct volume sets as
needed.

Scott

>
> Has anybody have this working on 9x7 system that can tell me why i keep
> getting dupicate drives. Every lun is a duplicate of lun 0 and prevents
> me from using more than 4 gb and i have 45gb installed. I have the
> lastest firmware on the f/w controller and the disk array controller
> firmware is at HP62. Im installing mpe 6.5 and from what i see requires
> no special patches. Im only using one controller(x) and one f/w
> controller. ODE id's everything 100% and all diags run on the 12H-no
> errors. Any help would be appreciated.
>
> Thanks
> Bill
>
> * To join/leave the list, search archives, change list settings, *
> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>


--
---------------------------------------------
Scott Swartzell   IT | Information Technology
             590-2152
9/20 - Mt Antero (14,269')
8 down, 46 to go.........

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *