Subject: | |
From: | |
Reply To: | |
Date: | Wed, 11 May 2011 11:01:51 -0400 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
We swapped out our older hp9000 hp printer for an hp9050dn and now my hp3000
spoolfiles sent to the printer request load paper in input tray1 manually
I have directed the output to go to a specific tray but it fails and I have
to check the printer every time to allow the report to take from tray 4.
Here is how I have my NPConfig file configured.
Any ideas?
Thanks
:print npconfig
# FILE NAME NPCONFIG.PUB.SYS
# CREATED BY JOE DOLLIVER of SPS. 07/10/2001
#
global # LaserJet 4Si setup file
(message_interval = 60 # Repeat msgs every >= 60 secs.
banner_tray = 1 # Upper tray has colored banner
# paper. data_intray = 4 # Lower tray has regular white # paper.
banner_trailer = FALSE # Only need a header page.
pjl_supported = TRUE # LJ4Si is a full PJL device.
jam_recovery = TRUE) # Reprints jammed pages by itself.
# the pound symbol "#" is for comments
#
# THE FOLLOWING CONFIGURATION IS FOR THE LQ1000 PRINTER
# DEVICE 66. INFORMATION FOLLOWING THE DEVICE NUMBER MUST BE
# CONTROLLED BY THE NETWORK ADDRESS.
#
# DEV 66 IP NUMBER CHANGED
# DEV 400,401,403,404 IP NUMBER CHANGED 12/4/2002.
# -------------------------------
# HP9000 FINANCE - LANDSCAPE - WHITE
400 (network_address = 10.1.2.52
banner_intray = 1
data_intray = 1)
# -------------------------------
#
# -------------------------------
# HP9000 FINANCE - PORTRAIT - WHITE
401 (network_address = 10.1.2.52
setup_file = HP5SILJ.HPENV.SYS
banner_intray = 1
data_intray = 1)
# -------------------------------
#
# HP9000 FINANCE - GREENBAR 2 SIDED
402 (network_address = 10.1.2.52
banner_intray = 20
data_intray = 20
snmp_enabled = false
pjl_supported = true )
# -------------------------------
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|
|
|