HP3000-L Archives

January 1997, Week 4

HP3000-L@RAVEN.UTC.EDU

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Reply To:
Date:
Mon, 27 Jan 1997 15:36:04 CDT
Content-Type:
text/plain
Parts/Attachments:
text/plain (58 lines)
     A bad experience of mine that I hope will help someone else
     later.

     During the weekend I had to reinstall my MPE_SYSTEM_VOLUME_SET
     (aka SYSTEM) volume.  Even though this was a planned install
     (I was removing a drive from the SYSTEM volume) I did not
     think to remove netbase/shareplex from the system.   I stored
     the SYSTEM volumeset using BACKUP 3000 from Orbit Software.
     After I restored @[log in to unmask] I tried to restore the rest of the
     system (@[log in to unmask]@[log in to unmask]@.SYS) and I received the following errors:

     --------------------------------------------------------------

      Restoring files from all mounted tapes ...
      NETBASE FATAL ERROR: -1120
      *** Pascal Error No. : 692
      FILE IS 'OUTPUT'

      ABORT: BACKUPPL.PUB.ORBIT
      NM SYS   a.00a25314 dbg_abort_trace+$24
      NM USER  1d0.00d40a34 P__PASCFERROR+$3e0
      NM PROG  3b1.00084b48 _start+$e4
      UNKNOWN:37:TAPEIO: External abort occurred, parms=0,0,700085
      MAIN   :37:TAPEIO: Error starting child processes,
     parms=-5207,-3,700099
      MAIN   :37:TAPEIO: Error starting all restore drives,
     parms=-5207,-140,700127
      MAIN PROCESS:

      MAIN   :37:TAPEIO: Unexpected ESCAPE encountered,
     parms=-5207,-138,700101


      MAIN   :37:RESTORE: TAPEIOSTARTRESTORESONS failed, parms=0,0,11116

      MAIN   :37:RESTORE: Parallel restore failed, parms=0,0,11115
      Resetting restore bits and compiling file statistics ...

     -----------------------------------------------------------------

     After experimentating on my own (which got me no where) Orbit
     came through with the solution within minutes.  The solution
     was to set the JCW to disable netbase as follows:

     SETJCW NBDISABLE=FATAL

     in my restore jobstream.


     Thanks to Orbitsw for their assistance!!!

     ---------------------------------------------------------------
     Barry Durand             "The opinions expressed in this
     Systems Engineer II       email are not necessarily the
     Gulf South Health Plans        opinions of my employer"
     [log in to unmask]
     ---------------------------------------------------------------

ATOM RSS1 RSS2