Thanks everyone for replying. I didn't get anything on my blackberry and just
found everyone's responses in my trash folder. The weird thing is I didn't see
anything in mapper. I'll try forcing the boot path to tape drive in the
morning, there is still another football game to go :)
Chuck Trites
>[log in to unmask]
>Trites Consulting, Inc.
>P.O. Box 5473
>Weirs Beach, NH 03246
>Phone: (603) 219-1500
________________________________
From: Jack Connor <[log in to unmask]>
To: [log in to unmask]
Sent: Sat, January 8, 2011 12:54:29 PM
Subject: Re: [HP3000-L] System won't boot
Hi Chuck,
The most likely culprit is that the boot path is wrong.
Depending on the box, you can do an SEA to find out the path of the tape
drive(s) and (depending on the box) either change the boot path with the PATH
command at the Main Menu, or if the box allows, do a BO path address (BO
10/4/0.5 for instance).
That should get you rolling again.
jack
-----Original Message-----
From: HP-3000 Systems Discussion [mailto:[log in to unmask]] On Behalf Of
Chuck Trites
Sent: Saturday, January 08, 2011 11:45 AM
To: [log in to unmask]
Subject: [HP3000-L] System won't boot
After replacing ldev 2 I am trying to boot the system from CSLT. Getting this
error ENTRY_TEST STATUS = 0 FAILED TO INITIALIZE ENTRY_INIT STATUS = -4
I have tried 2 different CSLT tapes and get the same error.
Anyone have any ideas?
Chuck Trites
>[log in to unmask]
>Trites Consulting, Inc.
>P.O. Box 5473
>Weirs Beach, NH 03246
>Phone: (603) 219-1500
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
Call us today about our Windows consulting for monthly support services, plus
configurations and migrations.
CONFIDENTIALITY NOTICE: This communication with its contents may contain
confidential information. It is solely for the use of the intended recipient(s).
Unauthorized interception, review, use or disclosure is prohibited and may
violate applicable laws including the Electronic Communications Privacy Act. If
you are not the intended recipient, please contact the sender and destroy all
copies of the communication.
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|
