Since you see the drive in MAPPER2, unless there is a typo somewhere
(and I don't see it,) I would double check/swap out the SCSI cable
and especially the SCSI terminator.  Make sure the terminator is for
a FW-SCSI device.  

Mark Ranft
Pro 3K
>
>
>---- Original Message ----
>From: [log in to unmask]
>To: [log in to unmask]
>Subject: RE: [HP3000-L] Mpe: HP7980S Configuration on A400
>Date: Thu, 30 Apr 2009 08:51:21 -0400
>
>>Trying to configure an HP7980S on A400, but receive 
>>  LLIO Device configuration Error -11 
>>
>>ODE / mapper 2 reports HP7980S on /0/0/2/0.5.0 which matches path
>printed 
>>on back of A400. Did the following configuration:
>>
>>AP PATH=0/0/2/0.5;ID=PSEUDO 
>>AD 9;PATH=0/0/2/0.5.0;ID=HP7980S
>>
>>     io> LD 9
>> LDEV:     9  DEVNAME:                    OUTDEV:        0   MODE:  
>          
>>   ID: HP7980S                            RSIZE:       128  
>DEVTYPE: TAPE     
>> PATH: 0/0/2/0.5.0                        MPETYPE:      24  
>MPESUBTYPE:  5    
>>CLASS: TAPE                
>>
>>:SHOWME
>>USER: #S2,MANAGER.SYS,PUB      (NOT IN BREAK)
>>RELEASE: C.70.00   MPE/iX HP31900 C.39.06   USER VERSION: C.70.00
>>CURRENT: THU, APR 30, 2009,  2:48 PM
>>LOGON:   THU, APR 30, 2009,  2:39 PM                                
>                   
>>                                                                    
>          
>>Any help greatly appreciated
>>Karsten.
>>
>>* To join/leave the list, search archives, change list settings, *
>>* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>>

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *